gpio_adapter.c

/****************************************************************************
 *
 *   Copyright (c) 2021 IMProject Development Team. All rights reserved.
 *   Authors: Igor Misic <igy1000mb@gmail.com>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name IMProject nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

#include "gpio_adapter.h"
#include "main.h"

void
GpioAdapter_init(void) {
    GPIO_InitTypeDef GPIO_InitStruct = {0};

    __HAL_RCC_GPIOA_CLK_ENABLE();
    __HAL_RCC_GPIOB_CLK_ENABLE();
    __HAL_RCC_GPIOC_CLK_ENABLE();
    __HAL_RCC_GPIOD_CLK_ENABLE();
    __HAL_RCC_GPIOE_CLK_ENABLE();
    __HAL_RCC_GPIOF_CLK_ENABLE();
#if defined(STM32N657xx)
    __HAL_RCC_GPIOG_CLK_ENABLE();
#endif

#if defined(LED1_Pin) && defined(LED1_Port) && defined(LED_OFF)
    HAL_GPIO_WritePin(LED1_Port, LED1_Pin, LED_OFF);
#endif

#if defined(LED2_Pin) && defined(LED2_Port) && defined(LED_OFF)
    HAL_GPIO_WritePin(LED2_Port, LED2_Pin, LED_OFF);
#endif

#if defined(LED1_Pin) && defined(LED1_Port)
    GPIO_InitStruct.Pin = LED1_Pin;
    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
    HAL_GPIO_Init(LED1_Port, &GPIO_InitStruct);
#endif

#if defined(LED2_Pin) && defined(LED2_Port)
    GPIO_InitStruct.Pin = LED2_Pin;
    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
    HAL_GPIO_Init(LED2_Port, &GPIO_InitStruct);
#endif

#if defined(BL_BUTTON_Pin) && defined(BL_BUTTON_Port)
    GPIO_InitStruct.Pin = BL_BUTTON_Pin;
    GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    HAL_GPIO_Init(BL_BUTTON_Port, &GPIO_InitStruct);
#endif

}

void
GpioAdapter_led1Toggle(void) {
#if defined(LED1_Pin) && defined(LED1_Port)
    HAL_GPIO_TogglePin(LED1_Port, LED1_Pin);
#endif
}

void
GpioAdapter_led1On(void) {
#if defined(LED1_Pin) && defined(LED1_Port) && defined(LED_ON)
    HAL_GPIO_WritePin(LED1_Port, LED1_Pin, LED_ON);
#endif
}

void
GpioAdapter_led1Off(void) {
#if defined(LED1_Pin) && defined(LED1_Port) && defined(LED_OFF)
    HAL_GPIO_WritePin(LED1_Port, LED1_Pin, LED_OFF);
#endif
}