Skip to content

README.md

Latest commit

 

History

History
39 lines (33 loc) · 1.34 KB

README.md

File metadata and controls

39 lines (33 loc) · 1.34 KB

Run Experiments

Since redis will use Cylon as default system-ram, make sure Cylon mode is system-ram by running

daxctl reconfigure-device --mode=system-ram --force dax0.0

Figure 7

This experiments is to compare the latency of Cylon vs CMM-H in Redis YCSB Workload-C.

  • To run and generate the same plot as Figure 7, run it with:
ENABLE_PRELOAD=1 RUN_TAG=cylon-1t ./run-figure7.sh
  • You can check the graph result inside ../plot/cylon-1t-cdf-1t.pdf

Figure 11

This experiment is to see the impact of different eviction policies on Cylon latency in redis. You must reboot/restart the VM between different eviction policies.

  • Run this script once per policy with a different RUN_TAG. 
    ENABLE_PRELOAD=1 RUN_TAG=fifo  ./run-figure11.sh
ENABLE_PRELOAD=1 RUN_TAG=lifo  ./run-figure11.sh
ENABLE_PRELOAD=1 RUN_TAG=clock ./run-figure11.sh
ENABLE_PRELOAD=1 RUN_TAG=s3fifo ./run-figure11.sh
  • After that you can run 
    gnuplot plot-figure11.gp
    Check the graph result in ../plot/redis-eviction-cylon.pdf

Figure 12

This experiment is to see the impact of prefetching degree on Cylon.

  • To run and generate the plot as Figure 12, you can run:
ENABLE_PRELOAD=1 RUN_TAG=prefetch ./run-figure12.sh
  • You can check the graph result in ../plot/redis-prefetch-cylon.pdf