Merge tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes, including fixes from mac80211, wifi, bpf.

  Relatively large batches of fixes from BPF and the WiFi stack, calm in
  general networking.

  Current release - regressions:

   - dpaa2-eth: fix buffer overrun when reporting ethtool statistics

  Current release - new code bugs:

   - bpf: fix incorrect state pruning for <8B spill/fill

   - iavf:
       - add missing unlocks in iavf_watchdog_task()
       - do not override the adapter state in the watchdog task (again)

   - mlxsw: spectrum_router: consolidate MAC profiles when possible

  Previous releases - regressions:

   - mac80211 fixes:
       - rate control, avoid driver crash for retransmitted frames
       - regression in SSN handling of addba tx
       - a memory leak where sta_info is not freed
       - marking TX-during-stop for TX in in_reconfig, prevent stall

   - cfg80211: acquire wiphy mutex on regulatory work

   - wifi drivers: fix build regressions and LED config dependency

   - virtio_net: fix rx_drops stat for small pkts

   - dsa: mv88e6xxx: unforce speed & duplex in mac_link_down()

  Previous releases - always broken:

   - bpf fixes:
       - kernel address leakage in atomic fetch
       - kernel address leakage in atomic cmpxchg's r0 aux reg
       - signed bounds propagation after mov32
       - extable fixup offset
       - extable address check

   - mac80211:
       - fix the size used for building probe request
       - send ADDBA requests using the tid/queue of the aggregation
         session
       - agg-tx: don't schedule_and_wake_txq() under sta->lock, avoid
         deadlocks
       - validate extended element ID is present

   - mptcp:
       - never allow the PM to close a listener subflow (null-defer)
       - clear 'kern' flag from fallback sockets, prevent crash
       - fix deadlock in __mptcp_push_pending()

   - inet_diag: fix kernel-infoleak for UDP sockets

   - xsk: do not sleep in poll() when need_wakeup set

   - smc: avoid very long waits in smc_release()

   - sch_ets: don't remove idle classes from the round-robin list

   - netdevsim:
       - zero-initialize memory for bpf map's value, prevent info leak
       - don't let user space overwrite read only (max) ethtool parms

   - ixgbe: set X550 MDIO speed before talking to PHY

   - stmmac:
       - fix null-deref in flower deletion w/ VLAN prio Rx steering
       - dwmac-rk: fix oob read in rk_gmac_setup

   - ice: time stamping fixes

   - systemport: add global locking for descriptor life cycle"

* tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (89 commits)
  bpf, selftests: Fix racing issue in btf_skc_cls_ingress test
  selftest/bpf: Add a test that reads various addresses.
  bpf: Fix extable address check.
  bpf: Fix extable fixup offset.
  bpf, selftests: Add test case trying to taint map value pointer
  bpf: Make 32->64 bounds propagation slightly more robust
  bpf: Fix signed bounds propagation after mov32
  sit: do not call ipip6_dev_free() from sit_init_net()
  net: systemport: Add global locking for descriptor lifecycle
  net/smc: Prevent smc_release() from long blocking
  net: Fix double 0x prefix print in SKB dump
  virtio_net: fix rx_drops stat for small pkts
  dsa: mv88e6xxx: fix debug print for SPEED_UNFORCED
  sfc_ef100: potential dereference of null pointer
  net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup
  net: usb: lan78xx: add Allied Telesis AT29M2-AF
  net/packet: rx_owner_map depends on pg_vec
  netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc
  dpaa2-eth: fix ethtool statistics
  ixgbe: set X550 MDIO speed before talking to PHY
  ...

Author: torvalds

Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst

@@ -440,6 +440,22 @@ NOTE: For 82599-based network connections, if you are enabling jumbo frames in
 a virtual function (VF), jumbo frames must first be enabled in the physical
 function (PF). The VF MTU setting cannot be larger than the PF MTU.
 
+NBASE-T Support
+---------------
+The ixgbe driver supports NBASE-T on some devices. However, the advertisement
+of NBASE-T speeds is suppressed by default, to accommodate broken network
+switches which cannot cope with advertised NBASE-T speeds. Use the ethtool
+command to enable advertising NBASE-T speeds on devices which support it::
+
+  ethtool -s eth? advertise 0x1800000001028
+
+On Linux systems with INTERFACES(5), this can be specified as a pre-up command
+in /etc/network/interfaces so that the interface is always brought up with
+NBASE-T support, e.g.::
+
+  iface eth? inet dhcp
+       pre-up ethtool -s eth? advertise 0x1800000001028 || true
+
 Generic Receive Offload, aka GRO
 --------------------------------
 The driver supports the in-kernel software implementation of GRO. GRO has

MAINTAINERS

@@ -3066,7 +3066,7 @@ F:	Documentation/devicetree/bindings/phy/phy-ath79-usb.txt
 F:	drivers/phy/qualcomm/phy-ath79-usb.c
 
 ATHEROS ATH GENERIC UTILITIES
-M:	Kalle Valo <kvalo@codeaurora.org>
+M:	Kalle Valo <kvalo@kernel.org>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
 F:	drivers/net/wireless/ath/*
@@ -3081,7 +3081,7 @@ W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath5k
 F:	drivers/net/wireless/ath/ath5k/
 
 ATHEROS ATH6KL WIRELESS DRIVER
-M:	Kalle Valo <kvalo@codeaurora.org>
+M:	Kalle Valo <kvalo@kernel.org>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
 W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath6kl
@@ -13248,7 +13248,7 @@ F:	include/uapi/linux/if_*
 F:	include/uapi/linux/netdevice.h
 
 NETWORKING DRIVERS (WIRELESS)
-M:	Kalle Valo <kvalo@codeaurora.org>
+M:	Kalle Valo <kvalo@kernel.org>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 Q:	http://patchwork.kernel.org/project/linux-wireless/list/
@@ -15704,15 +15704,15 @@ T:	git git://linuxtv.org/anttip/media_tree.git
 F:	drivers/media/tuners/qt1010*
 
 QUALCOMM ATHEROS ATH10K WIRELESS DRIVER
-M:	Kalle Valo <kvalo@codeaurora.org>
+M:	Kalle Valo <kvalo@kernel.org>
 L:	ath10k@lists.infradead.org
 S:	Supported
 W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
 F:	drivers/net/wireless/ath/ath10k/
 
 QUALCOMM ATHEROS ATH11K WIRELESS DRIVER
-M:	Kalle Valo <kvalo@codeaurora.org>
+M:	Kalle Valo <kvalo@kernel.org>
 L:	ath11k@lists.infradead.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
@@ -15885,7 +15885,7 @@ F:	Documentation/devicetree/bindings/media/*venus*
 F:	drivers/media/platform/qcom/venus/
 
 QUALCOMM WCN36XX WIRELESS DRIVER
-M:	Kalle Valo <kvalo@codeaurora.org>
+M:	Kalle Valo <kvalo@kernel.org>
 L:	wcn36xx@lists.infradead.org
 S:	Supported
 W:	https://wireless.wiki.kernel.org/en/users/Drivers/wcn36xx

arch/x86/net/bpf_jit_comp.c

@@ -1252,19 +1252,54 @@ st:			if (is_imm8(insn->off))
 		case BPF_LDX | BPF_MEM | BPF_DW:
 		case BPF_LDX | BPF_PROBE_MEM | BPF_DW:
 			if (BPF_MODE(insn->code) == BPF_PROBE_MEM) {
-				/* test src_reg, src_reg */
-				maybe_emit_mod(&prog, src_reg, src_reg, true); /* always 1 byte */
-				EMIT2(0x85, add_2reg(0xC0, src_reg, src_reg));
-				/* jne start_of_ldx */
-				EMIT2(X86_JNE, 0);
+				/* Though the verifier prevents negative insn->off in BPF_PROBE_MEM
+				 * add abs(insn->off) to the limit to make sure that negative
+				 * offset won't be an issue.
+				 * insn->off is s16, so it won't affect valid pointers.
+				 */
+				u64 limit = TASK_SIZE_MAX + PAGE_SIZE + abs(insn->off);
+				u8 *end_of_jmp1, *end_of_jmp2;
+
+				/* Conservatively check that src_reg + insn->off is a kernel address:
+				 * 1. src_reg + insn->off >= limit
+				 * 2. src_reg + insn->off doesn't become small positive.
+				 * Cannot do src_reg + insn->off >= limit in one branch,
+				 * since it needs two spare registers, but JIT has only one.
+				 */
+
+				/* movabsq r11, limit */
+				EMIT2(add_1mod(0x48, AUX_REG), add_1reg(0xB8, AUX_REG));
+				EMIT((u32)limit, 4);
+				EMIT(limit >> 32, 4);
+				/* cmp src_reg, r11 */
+				maybe_emit_mod(&prog, src_reg, AUX_REG, true);
+				EMIT2(0x39, add_2reg(0xC0, src_reg, AUX_REG));
+				/* if unsigned '<' goto end_of_jmp2 */
+				EMIT2(X86_JB, 0);
+				end_of_jmp1 = prog;
+
+				/* mov r11, src_reg */
+				emit_mov_reg(&prog, true, AUX_REG, src_reg);
+				/* add r11, insn->off */
+				maybe_emit_1mod(&prog, AUX_REG, true);
+				EMIT2_off32(0x81, add_1reg(0xC0, AUX_REG), insn->off);
+				/* jmp if not carry to start_of_ldx
+				 * Otherwise ERR_PTR(-EINVAL) + 128 will be the user addr
+				 * that has to be rejected.
+				 */
+				EMIT2(0x73 /* JNC */, 0);
+				end_of_jmp2 = prog;
+
 				/* xor dst_reg, dst_reg */
 				emit_mov_imm32(&prog, false, dst_reg, 0);
 				/* jmp byte_after_ldx */
 				EMIT2(0xEB, 0);
 
-				/* populate jmp_offset for JNE above */
-				temp[4] = prog - temp - 5 /* sizeof(test + jne) */;
+				/* populate jmp_offset for JB above to jump to xor dst_reg */
+				end_of_jmp1[-1] = end_of_jmp2 - end_of_jmp1;
+				/* populate jmp_offset for JNC above to jump to start_of_ldx */
 				start_of_ldx = prog;
+				end_of_jmp2[-1] = start_of_ldx - end_of_jmp2;
 			}
 			emit_ldx(&prog, BPF_SIZE(insn->code), dst_reg, src_reg, insn->off);
 			if (BPF_MODE(insn->code) == BPF_PROBE_MEM) {
@@ -1305,7 +1340,7 @@ st:			if (is_imm8(insn->off))
 				 * End result: x86 insn "mov rbx, qword ptr [rax+0x14]"
 				 * of 4 bytes will be ignored and rbx will be zero inited.
 				 */
-				ex->fixup = (prog - temp) | (reg2pt_regs[dst_reg] << 8);
+				ex->fixup = (prog - start_of_ldx) | (reg2pt_regs[dst_reg] << 8);
 			}
 			break;
 

drivers/net/dsa/mv88e6xxx/chip.c

@@ -768,6 +768,10 @@ static void mv88e6xxx_mac_link_down(struct dsa_switch *ds, int port,
 	if ((!mv88e6xxx_port_ppu_updates(chip, port) ||
 	     mode == MLO_AN_FIXED) && ops->port_sync_link)
 		err = ops->port_sync_link(chip, port, mode, false);
+
+	if (!err && ops->port_set_speed_duplex)
+		err = ops->port_set_speed_duplex(chip, port, SPEED_UNFORCED,
+						 DUPLEX_UNFORCED);
 	mv88e6xxx_reg_unlock(chip);
 
 	if (err)

drivers/net/dsa/mv88e6xxx/port.c

@@ -283,7 +283,7 @@ static int mv88e6xxx_port_set_speed_duplex(struct mv88e6xxx_chip *chip,
 	if (err)
 		return err;
 
-	if (speed)
+	if (speed != SPEED_UNFORCED)
 		dev_dbg(chip->dev, "p%d: Speed set to %d Mbps\n", port, speed);
 	else
 		dev_dbg(chip->dev, "p%d: Speed unforced\n", port);
@@ -516,7 +516,7 @@ int mv88e6393x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
 	if (err)
 		return err;
 
-	if (speed)
+	if (speed != SPEED_UNFORCED)
 		dev_dbg(chip->dev, "p%d: Speed set to %d Mbps\n", port, speed);
 	else
 		dev_dbg(chip->dev, "p%d: Speed unforced\n", port);

drivers/net/ethernet/broadcom/bcmsysport.c

@@ -1309,11 +1309,11 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
 	struct bcm_sysport_priv *priv = netdev_priv(dev);
 	struct device *kdev = &priv->pdev->dev;
 	struct bcm_sysport_tx_ring *ring;
+	unsigned long flags, desc_flags;
 	struct bcm_sysport_cb *cb;
 	struct netdev_queue *txq;
 	u32 len_status, addr_lo;
 	unsigned int skb_len;
-	unsigned long flags;
 	dma_addr_t mapping;
 	u16 queue;
 	int ret;
@@ -1373,8 +1373,10 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
 	ring->desc_count--;
 
 	/* Ports are latched, so write upper address first */
+	spin_lock_irqsave(&priv->desc_lock, desc_flags);
 	tdma_writel(priv, len_status, TDMA_WRITE_PORT_HI(ring->index));
 	tdma_writel(priv, addr_lo, TDMA_WRITE_PORT_LO(ring->index));
+	spin_unlock_irqrestore(&priv->desc_lock, desc_flags);
 
 	/* Check ring space and update SW control flow */
 	if (ring->desc_count == 0)
@@ -2013,6 +2015,7 @@ static int bcm_sysport_open(struct net_device *dev)
 	}
 
 	/* Initialize both hardware and software ring */
+	spin_lock_init(&priv->desc_lock);
 	for (i = 0; i < dev->num_tx_queues; i++) {
 		ret = bcm_sysport_init_tx_ring(priv, i);
 		if (ret) {

drivers/net/ethernet/broadcom/bcmsysport.h

@@ -711,6 +711,7 @@ struct bcm_sysport_priv {
 	int			wol_irq;
 
 	/* Transmit rings */
+	spinlock_t		desc_lock;
 	struct bcm_sysport_tx_ring *tx_rings;
 
 	/* Receive queue */

drivers/net/ethernet/broadcom/genet/bcmmii.c

@@ -589,9 +589,9 @@ static int bcmgenet_mii_pd_init(struct bcmgenet_priv *priv)
 		 * Internal or external PHY with MDIO access
 		 */
 		phydev = phy_attach(priv->dev, phy_name, pd->phy_interface);
-		if (!phydev) {
+		if (IS_ERR(phydev)) {
 			dev_err(kdev, "failed to register PHY device\n");
-			return -ENODEV;
+			return PTR_ERR(phydev);
 		}
 	} else {
 		/*

drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h

@@ -388,6 +388,8 @@ struct dpaa2_eth_ch_stats {
 	__u64 bytes_per_cdan;
 };
 
+#define DPAA2_ETH_CH_STATS	7
+
 /* Maximum number of queues associated with a DPNI */
 #define DPAA2_ETH_MAX_TCS		8
 #define DPAA2_ETH_MAX_RX_QUEUES_PER_TC	16

drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c

@@ -278,7 +278,7 @@ static void dpaa2_eth_get_ethtool_stats(struct net_device *net_dev,
 	/* Per-channel stats */
 	for (k = 0; k < priv->num_channels; k++) {
 		ch_stats = &priv->channel[k]->stats;
-		for (j = 0; j < sizeof(*ch_stats) / sizeof(__u64) - 1; j++)
+		for (j = 0; j < DPAA2_ETH_CH_STATS; j++)
 			*((__u64 *)data + i + j) += *((__u64 *)ch_stats + j);
 	}
 	i += j;