walk assist is intermittently working

[rananna]

@4var1 , @casainho ,This is a strange one.
Wlak assist will work fine once, and then stop working.
This happens with both the wired and wireless remotes.
@4var1 , could you please try this to see if it happens to you?

[4var1]

OK do you mean the assist stops working, or the flashing leds or both? I just did a quick test on my spare motor (doesn't have 48v supply so motor doesn't spin) and walk assist flashing leds worked fine, tested 3 or 4 times in succession.

…

On Thu, 25 Feb 2021, 15:31 rananna, ***@***.***> wrote: @4var1 <https://github.com/4var1> , @casainho <https://github.com/casainho> ,This is a strange one. Wlak assist will work fine once, and then stop working. This happens with both the wired and wireless remotes. @4var1 <https://github.com/4var1> , could you please try this to see if it happens to you? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#103>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ASRDIVTOL5HXMXELI3KQHC3TAZUMBANCNFSM4YGWVMAA> .

[rananna]

Boy, I need to be more precise in my description!
What I mean is that the motor works fine ONCE, then stops working.
I wondered if it had something to do with the mysterious delay variable set to 2.
Anyway, maybe it's my setup, so I wondered if either of you were seeing any issues with the motor in walk mode.
LED signalling works fine for this mode.

[4var1]

OK I'll try to find some time tomorrow to flash the bike and see what's what. I guess I should give ota flashing a go too... I'm still using swd all the time

…

On Thu, 25 Feb 2021, 18:58 rananna, ***@***.***> wrote: Boy, I need to be more precise in my description! What I mean is that the motor works fine ONCE, then stops working. I wondered if it had something to do with the mysterious delay variable set to 2. Anyway, maybe it's my setup, so I wondered if either of you were seeing any issues with the motor in walk mode. LED signalling works fine for this mode. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#103 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ASRDIVU6FVNKHONDHMTDDS3TA2MULANCNFSM4YGWVMAA> .

[4var1]

I connected a 48v supply to my test motor, walk assist works fine repeatedly, motor and leds activating OK.

…

On Thu, 25 Feb 2021, 21:37 Ben Machin, ***@***.***> wrote: OK I'll try to find some time tomorrow to flash the bike and see what's what. I guess I should give ota flashing a go too... I'm still using swd all the time On Thu, 25 Feb 2021, 18:58 rananna, ***@***.***> wrote: > Boy, I need to be more precise in my description! > What I mean is that the motor works fine ONCE, then stops working. > I wondered if it had something to do with the mysterious delay variable > set to 2. > Anyway, maybe it's my setup, so I wondered if either of you were seeing > any issues with the motor in walk mode. > LED signalling works fine for this mode. > > — > You are receiving this because you were mentioned. > Reply to this email directly, view it on GitHub > <#103 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/ASRDIVU6FVNKHONDHMTDDS3TA2MULANCNFSM4YGWVMAA> > . >

[rananna]

Ok must be something associated with my build. Thanks for looking.

[4var1]

Just merged the latest changes and still works OK. As for timeout for me there is only a delay before walk assist starts working. Any break in button press results in stop of walk assist. Doesn't seem to be any 2s period where button release is ignored.

…

On Thu, 25 Feb 2021, 21:48 rananna, ***@***.***> wrote: Ok must be something associated with my build. Thanks for looking. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#103 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ASRDIVUEZIK2CZH7KTQBLOLTA3ATFANCNFSM4YGWVMAA> .

[rananna]

I am still seeing walk assist working intermittently.
It will work fine 2 or 3 times in a row, then stop working.
rebooting the motor firmware will get it working again.
Can't imagine what is going wrong on my end.
Will keep this issue open for now....