Add code for task-09 application

Author: PeterKietzmann

task-09/Makefile

@@ -0,0 +1,57 @@
+# name of your application
+APPLICATION = task-09
+
+# If no BOARD is found in the environment, use this default:
+BOARD ?= native
+
+# This has to be the absolute path to the RIOT base directory:
+RIOTBASE ?= $(CURDIR)/../RIOT
+
+BOARD_INSUFFICIENT_MEMORY := airfy-beacon chronos msb-430 msb-430h nrf51dongle \
+                          nrf6310 nucleo-f103 nucleo-f334 pca10000 pca10005 spark-core \
+                          stm32f0discovery telosb weio wsn430-v1_3b wsn430-v1_4 \
+                          yunjia-nrf51822 z1 nucleo-f072
+
+# Include packages that pull up and auto-init the link layer.
+# NOTE: 6LoWPAN will be included if IEEE802.15.4 devices are present
+USEMODULE += gnrc_netdev_default
+USEMODULE += auto_init_gnrc_netif
+# Specify the mandatory networking modules for IPv6 and UDP
+USEMODULE += gnrc_ipv6_router_default
+USEMODULE += gnrc_udp
+# Add a routing protocol
+USEMODULE += gnrc_rpl
+USEMODULE += auto_init_gnrc_rpl
+# This application dumps received packets to STDIO using the pktdump module
+USEMODULE += gnrc_pktdump
+# Additional networking modules that can be dropped if not needed
+USEMODULE += gnrc_icmpv6_echo
+# Add also the shell, some shell commands
+USEMODULE += shell
+USEMODULE += shell_commands
+USEMODULE += ps
+USEMODULE += netstats_l2
+USEMODULE += netstats_ipv6
+USEMODULE += netstats_rpl
+
+# Set a custom 802.15.4 channel if needed
+DEFAULT_CHANNEL ?= 26
+CFLAGS += -DDEFAULT_CHANNEL=$(DEFAULT_CHANNEL)
+
+CFLAGS += -DGNRC_RPL_LIFETIME_UNIT=1 -DGNRC_RPL_DEFAULT_LIFETIME=32
+CFLAGS += -DGNRC_RPL_REGULAR_DAO_INTERVAL=13
+CFLAGS += -DGNRC_RPL_DEFAULT_DIO_INTERVAL_DOUBLINGS=13
+
+# Comment this out to disable code in RIOT that does safety checking
+# which is not needed in a production environment but helps in the
+# development process:
+CFLAGS += -DDEVELHELP
+
+# Comment this out to join RPL DODAGs even if DIOs do not contain
+# DODAG Configuration Options (see the doc for more info)
+# CFLAGS += -DGNRC_RPL_DODAG_CONF_OPTIONAL_ON_JOIN
+
+# Change this to 0 show compiler invocation lines by default:
+QUIET ?= 1
+
+include $(RIOTBASE)/Makefile.include

task-09/README.md

@@ -9,30 +9,25 @@ It uses an adapted version of the default [`gnrc_networking`](https://github.com
 ## Prerequisites
 
 * Compile the application and run on your `BOARD`
-* Build groups of at least three persons
-* Each group should change to an individual RF channel. It can be changed by e.g.
+* For this task you need at least three boards (you can form groups with your neighbors)
+* Each "group" should change to an individual RF channel. It can be changed by e.g.
 
 ```
-ifconfig 7 set chan 11
+ifconfig <if_id> set chan 11
 
 ```
 
-* Check if this worked by looking at the output of the `ifconfig` command. Also have a look at the preconfigured IPv6 addresses that all have a local scope.
+Use the `ifconfig` command to obtain the `<id_id>`.
 
+* Check if this worked by looking at the output of `ifconfig` again. Also have a look at the preconfigured IPv6 addresses that all have a local scope.
 
-## Task 9.1: Initialize RPL
-
-* In order to use RPL we have to choose **one** RPL root node and configure a global IPv6 address for it. This is simply done by adding the address to the network interface (`7`) via `ifconfig`:
-(Please note that the network interface is `6` when running on native)
 
-```
-ifconfig 7 add 2001:db8::1
-```
+## Task 9.1: Initialize RPL
 
-* Next we need to initialize RPL on the network interface (`7`) for **all** nodes: 
+* In order to use RPL we have to choose **one** RPL root node and configure a global IPv6 address for it. This is simply done by adding the address to the network interface (`<if_id>`) via `ifconfig`:
 
 ```
-rpl init 7
+ifconfig <if_id> add 2001:db8::1
 ```
 
 * To start the routing process and the generation of a RPL DODAG (Destination Oriented Directed Acyclic Graph), we need to start the root node with an Instance ID (here `1`) and a DODAG ID (here its global IPv6 address) 
@@ -45,7 +40,7 @@ rpl root 1 2001:db8::1
 
 * On not-root nodes, look at the output of `ifconfig` again. You should see that a global unicast IPv6 address has been set automatically.
 
-* Typing `rpl` gives you some information about the nodes position in the DODAG. Check the local IPv6 address of the selected parent node. Look for value `R:` which describes the "rank" or more general, the hop count metric. What is the increment for one hop?
+* Typing `rpl` gives you some information about the nodes position in the DODAG. Check the local IPv6 address of the selected parent node. Look for value `R:` which describes the "rank" or more general, the position in the DODAG according to the metric. What is the increment for one hop?
 
 * RPL fills the FIB (Forwarding Information Base) table which is consulted when forwarding packets. Check the entries on the root node and see the relation between the destination and next hop addresses.
 

task-09/main.c

@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2015 Freie Universität Berlin
+ * Copyright (C) 2016 Hochschule für Angewandte Wissenschaften Hamburg
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @ingroup     examples
+ * @{
+ *
+ * @file
+ * @brief       Example application for demonstrating the RIOT network stack
+ *
+ * @author      Hauke Petersen <hauke.petersen@fu-berlin.de>
+ * @author      Peter Kietzmann <peter.kietzmann@haw-hamburg.de>
+ *
+ * @}
+ */
+
+#include <stdio.h>
+
+#include "shell.h"
+#include "msg.h"
+#include "thread.h"
+
+#include "net/gnrc.h"
+#include "net/gnrc/ipv6/netif.h"
+#include "net/gnrc/ipv6.h"
+
+#define MAIN_QUEUE_SIZE     (8)
+static msg_t _main_msg_queue[MAIN_QUEUE_SIZE];
+
+extern int udp_cmd(int argc, char **argv);
+
+static const shell_command_t shell_commands[] = {
+    { "udp", "send data over UDP and listen on UDP ports", udp_cmd },
+    { NULL, NULL, NULL }
+};
+
+#ifdef MODULE_GNRC_SIXLOWPAN
+static char _stack[THREAD_STACKSIZE_MAIN];
+
+static void *_ipv6_fwd_eventloop(void *arg)
+{
+    (void)arg;
+
+    msg_t msg, msg_q[8];
+    gnrc_netreg_entry_t me_reg;
+
+    msg_init_queue(msg_q, 8);
+
+    me_reg.demux_ctx = GNRC_NETREG_DEMUX_CTX_ALL;
+    me_reg.pid = thread_getpid();
+
+    gnrc_netreg_register(GNRC_NETTYPE_SIXLOWPAN, &me_reg);
+
+    while(1) {
+        msg_receive(&msg);
+        gnrc_pktsnip_t *pkt = msg.content.ptr;
+        if(msg.type == GNRC_NETAPI_MSG_TYPE_SND) {
+            gnrc_pktsnip_t *ipv6 = gnrc_pktsnip_search_type(pkt, GNRC_NETTYPE_IPV6);
+            ipv6 = ipv6->data;
+
+            ipv6_hdr_t *ipv6_hdr =(ipv6_hdr_t *)ipv6;
+
+            /* get the first IPv6 interface and prints its address */
+            kernel_pid_t ifs[GNRC_NETIF_NUMOF];
+            gnrc_netif_get(ifs);
+            gnrc_ipv6_netif_t *entry = gnrc_ipv6_netif_get(ifs[0]);
+            for (int i = 0; i < GNRC_IPV6_NETIF_ADDR_NUMOF; i++) {
+                if ( (!ipv6_addr_is_link_local(&entry->addrs[i].addr)) && (!ipv6_addr_is_link_local(&ipv6_hdr->src)) 
+                    && (!ipv6_addr_is_link_local(&ipv6_hdr->dst)) && !(entry->addrs[i].flags & GNRC_IPV6_NETIF_ADDR_FLAGS_NON_UNICAST)
+                    && (!ipv6_addr_is_unspecified(&entry->addrs[i].addr)) ) {
+
+                    if(!ipv6_addr_equal(&entry->addrs[i].addr, &(ipv6_hdr->src))){
+
+                        char addr_str[IPV6_ADDR_MAX_STR_LEN];
+                        printf("IPv6 ROUTER: forward from src = %s ", ipv6_addr_to_str(addr_str, &(ipv6_hdr->src), sizeof(addr_str)) );
+                        printf("to dst = %s\n",ipv6_addr_to_str(addr_str, &(ipv6_hdr->dst), sizeof(addr_str)));
+                    }
+                }
+            }
+        }
+        gnrc_pktbuf_release(pkt);
+    }
+    /* never reached */
+    return NULL;
+}
+#endif
+
+int main(void)
+{
+    /* we need a message queue for the thread running the shell in order to
+     * receive potentially fast incoming networking packets */
+    msg_init_queue(_main_msg_queue, MAIN_QUEUE_SIZE);
+    puts("RIOT network stack example application");
+
+#ifdef MODULE_GNRC_SIXLOWPAN
+    thread_create(_stack, sizeof(_stack), (THREAD_PRIORITY_MAIN - 4),
+                         THREAD_CREATE_STACKTEST, _ipv6_fwd_eventloop, NULL, "ipv6_fwd");
+#endif
+    /* start shell */
+    puts("All up, running the shell now");
+    char line_buf[SHELL_DEFAULT_BUFSIZE];
+    shell_run(shell_commands, line_buf, SHELL_DEFAULT_BUFSIZE);
+
+    /* should be never reached */
+    return 0;
+}