Skip to content

configuration.md

Latest commit

 

History

History
173 lines (129 loc) · 7.43 KB

configuration.md

File metadata and controls

173 lines (129 loc) · 7.43 KB

Configuration

You can find the default docker-compose.yaml file inside the deployment repository.

If you would like to make changes to the default configurations, we highly recommend you to create a new file called docker-compose.override.yaml in the same directory where the base file (docker-compose.yaml) is located, and make your customizations inside the docker-compose.override.yaml file.

WARNING: For configuration of Sourcegraph, see Sourcegraph's configuration docs.

What is an override file?

Docker Compose allows you to customize configuration settings using an override file called docker-compose.override.yaml, which allows customizations to persist through upgrades without needing to manage merge conflicts as changes are not made directly to the base docker-compose.yaml file.

When you run the docker-compose up command, the override file will be automatically merged over the base docker-compose.yaml file.

The official Docker Compose docs provide details about override files.

Examples

In order to make changes to the configuration settings defined in the base file docker-compose.yaml, create an empty docker-compose.override.yaml file in the same directory as the docker-compose.yaml file, using the same version number, and then add the customizations under the services field.

Adjust resources

Note that you will only need to list the fragments that you would like to change from the base file.

# docker-compose.override.yaml
version: '2.4'
services:
  gitserver-0:
    cpus: 8
    mem_limit: '26g'

Create multiple gitserver shards

Split gitserver across multiple shards:

# docker-compose.override.yaml
version: '2.4'
services:
# Adjust resources for gitserver-0
# And then create an anchor to share with the replica
  gitserver-0: &gitserver
    cpus: 8
    mem_limit: '26g'
# Create a new service called gitserver-1,
# which is an extension of gitserver-0
  gitserver-1:
  # Extend the original gitserver-0 to get the image values etc
    extends:
      file: docker-compose.yaml
      service: gitserver-0
    # Use the new resources values from gitserver-0 above
    <<: *gitserver
    # Since this is an extension of the original gitserver-0,
    # we will have to rename the container name to gitserver-1
    container_name: gitserver-1
    # Assign it to a new volume which we will create below in the volumes section
    volumes:
      - 'gitserver-1:/data/repos'
    # Assign a new host name so it doesn't use the gitserver-0 one
    hostname: gitserver-1
# Add the new replica to other related services as environment
  sourcegraph-frontend-0: &frontend
    cpus: 6
    mem_limit: '6g'
    environment:
      - &env_gitserver 'SRC_GIT_SERVERS=gitserver-0:3178 gitserver-1:3178'
# Use the same override values as sourcegraph-frontend-0 above
  sourcegraph-frontend-internal:
    <<: *frontend
# Add the updated environment for gitserver from frontend to worker using anchor
  worker:
    environment:
      - *env_gitserver
# Add a new volume assigned to the new gitserver replica
volumes:
  gitserver-1:

Disable a service

You can "disable services" by assigning them to one or more profiles, so that when running the docker compose up command, services assigned to profiles will not be started unless explicitly specified in the command (e.g., docker compose --profile disabled up).

For example, when you need to disable the internal codeintel-db in order to use an external database, you can assign codeintel-db to a profile called disabled:

# docker-compose.override.yaml
version: '2.4'
services:
  codeintel-db:
    profiles:
      - disabled

Enable tracing

Tracing should be enabled in the docker-compose.yaml file by default.

If not, you can enable it by setting the environment variable to SAMPLING_STRATEGIES_FILE=/etc/jaeger/sampling_strategies.json in the jaeger container:

# docker-compose.override.yaml
version: '2.4'
services:
  jaeger:
    environment:
      - 'SAMPLING_STRATEGIES_FILE=/etc/jaeger/sampling_strategies.json'

Git configuration

Git SSH configuration

Provide your gitserver instance with your SSH / Git configuration (e.g. .ssh/config, .ssh/id_rsa, .ssh/id_rsa.pub, and .ssh/known_hosts. You can also provide other files like .netrc, .gitconfig, etc. if needed) by mounting a directory that contains this configuration into the gitserver container.

For example, in the gitserver-0 container configuration in your docker-compose.yaml file or docker-compose.override.yaml, add the volume listed in the following example, while replacing ~/path/on/host/ with the path on the host machine to the .ssh directory:

# docker-compose.override.yaml
version: '2.4'
services:
  gitserver-0:
    volumes:
      - 'gitserver-0:/data/repos'
      - '~/path/on/host/.ssh:/home/sourcegraph/.ssh'

WARNING: The permissions on your SSH / Git configuration must be set to be readable by the user in the gitserver container. For example, run chmod -v -R 600 ~/path/to/.ssh in the folder on the host machine.

Git HTTP(S) authentication

The easiest way to specify HTTP(S) authentication for repositories is to include the username and password in the clone URL itself, such as https://user:password@example.com/my/repo. These credentials won't be displayed to non-admin users.

Otherwise, follow the previous steps for mounting SSH configuration to mount a host directory containing the desired .netrc file to /home/sourcegraph/ in the gitserver container.

Expose debug port

To generate pprof profiling data, you must configure your deployment to expose port 6060 on one of your frontend containers, for example:

# docker-compose.override.yaml
version: '2.4'
services:
  sourcegraph-frontend-0:
    ports:
      - '0.0.0.0:6060:6060'

For specific ports that can be exposed, see the debug ports section of Sourcegraphs's generate pprof profiling data docs.

Set environment variables

Add/modify the environment variables to all of the sourcegraph-frontend-* services and the sourcegraph-frontend-internal service in the Docker Compose YAML file:

# docker-compose.override.yaml
version: '2.4'
services:
  sourcegraph-frontend-0:
    environment:
      - (YOUR CODE)

See "Environment variables in Compose" for other ways to pass these environment variables to the relevant services (including from the command line, a .env file, etc.).

Use an external database

The Docker Compose configuration has its own internal PostgreSQL and Redis databases.

You can alternatively configure Sourcegraph to use external services.