base-sepolia.json

{"language":"Solidity","sources":{"BaseFundV7.sol":{"content":"// SPDX-License-Identifier: MIT\r\npragma solidity 0.8.24;\r\n\r\n/**\r\n * BaseFundV7\r\n * - ERC20 crowdfunding with optional Merkle allowlist.\r\n * - Two-step ownership (Ownable2Step).\r\n * - Roles: TREASURER_ROLE for withdrawals.\r\n * - Pausable, reentrancy-safe, caps (soft/hard), funding window.\r\n */\r\n\r\nimport {IERC20} from \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\r\nimport {SafeERC20} from \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\r\nimport {ReentrancyGuard} from \"@openzeppelin/contracts/utils/ReentrancyGuard.sol\";\r\nimport {Ownable, Ownable2Step} from \"@openzeppelin/contracts/access/Ownable2Step.sol\";\r\nimport {AccessControl} from \"@openzeppelin/contracts/access/AccessControl.sol\";\r\nimport {Pausable} from \"@openzeppelin/contracts/utils/Pausable.sol\";\r\nimport {MerkleProof} from \"@openzeppelin/contracts/utils/cryptography/MerkleProof.sol\";\r\n\r\ncontract BaseFundV7 is Ownable2Step, AccessControl, ReentrancyGuard, Pausable {\r\n    using SafeERC20 for IERC20;\r\n\r\n    // ---- Roles ----\r\n    bytes32 public constant TREASURER_ROLE = keccak256(\"TREASURER_ROLE\");\r\n\r\n    // ---- Errors ----\r\n    error ZeroAddress();\r\n    error ZeroAmount();\r\n    error CampaignNotStarted();\r\n    error CampaignEnded();\r\n    error CapExceeded();\r\n    error RefundNotAllowed();\r\n    error NothingToRefund();\r\n    error SoftCapNotReached();\r\n    error SoftCapReached();\r\n    error TreasuryNotSet();\r\n    error AllowlistRequired();\r\n    error InvalidProof();\r\n\r\n    // ---- Storage ----\r\n    IERC20  public immutable token;\r\n    address public treasury;\r\n    uint64  public start;\r\n    uint64  public end;\r\n    uint256 public softCap;\r\n    uint256 public hardCap;\r\n\r\n    uint256 public totalContributed;\r\n    mapping(address => uint256) public contributed;\r\n\r\n    // Allowlist\r\n    bytes32 public allowlistRoot;   // 0x0 means \"unused\"\r\n    bool    public allowlistEnabled;\r\n\r\n    // ---- Events ----\r\n    event Contributed(address indexed sender, uint256 amount, uint256 totalAfter);\r\n    event ContributedAllowlisted(address indexed sender, uint256 amount, uint256 totalAfter);\r\n    event Refunded(address indexed sender, uint256 amount);\r\n    event Withdrawn(address indexed to, uint256 amount);\r\n    event TreasuryUpdated(address indexed oldTreasury, address indexed newTreasury);\r\n    event WindowUpdated(uint64 oldStart, uint64 oldEnd, uint64 newStart, uint64 newEnd);\r\n    event AllowlistRootSet(bytes32 oldRoot, bytes32 newRoot);\r\n    event AllowlistToggled(bool enabled);\r\n\r\n    constructor(\r\n        address initialOwner,\r\n        address token_,\r\n        address treasury_,\r\n        uint64 start_,\r\n        uint64 end_,\r\n        uint256 softCap_,\r\n        uint256 hardCap_,\r\n        bytes32 allowlistRoot_,     // set 0x0 if not used\r\n        bool allowlistEnabled_      // false if not used\r\n    ) Ownable(initialOwner) {\r\n        if (token_ == address(0)) revert ZeroAddress();\r\n        if (treasury_ == address(0)) revert ZeroAddress();\r\n        if (start_ >= end_) revert();\r\n\r\n        token = IERC20(token_);\r\n        treasury = treasury_;\r\n        start = start_;\r\n        end = end_;\r\n        softCap = softCap_;\r\n        hardCap = hardCap_;\r\n        allowlistRoot = allowlistRoot_;\r\n        allowlistEnabled = allowlistEnabled_;\r\n\r\n        _grantRole(DEFAULT_ADMIN_ROLE, initialOwner);\r\n        _grantRole(TREASURER_ROLE, initialOwner);\r\n    }\r\n\r\n    // ---- Views ----\r\n    function campaignActive() public view returns (bool) {\r\n        return block.timestamp >= start && block.timestamp < end && !paused();\r\n    }\r\n    function campaignSuccessful() public view returns (bool) {\r\n        return totalContributed >= softCap;\r\n    }\r\n\r\n    // ---- Owner/Admin ----\r\n    function setTreasury(address newTreasury) external onlyOwner {\r\n        if (newTreasury == address(0)) revert ZeroAddress();\r\n        emit TreasuryUpdated(treasury, newTreasury);\r\n        treasury = newTreasury;\r\n    }\r\n\r\n    function updateWindow(uint64 newStart, uint64 newEnd) external onlyOwner {\r\n        if (block.timestamp >= start) revert CampaignNotStarted(); // not editable after start\r\n        if (newStart >= newEnd) revert();\r\n        emit WindowUpdated(start, end, newStart, newEnd);\r\n        start = newStart;\r\n        end   = newEnd;\r\n    }\r\n\r\n    function setAllowlistRoot(bytes32 newRoot) external onlyOwner {\r\n        emit AllowlistRootSet(allowlistRoot, newRoot);\r\n        allowlistRoot = newRoot;\r\n    }\r\n\r\n    function setAllowlistEnabled(bool enabled) external onlyOwner {\r\n        allowlistEnabled = enabled;\r\n        emit AllowlistToggled(enabled);\r\n    }\r\n\r\n    // Pausable (admin role)\r\n    function pause()   external onlyRole(DEFAULT_ADMIN_ROLE) { _pause(); }\r\n    function unpause() external onlyRole(DEFAULT_ADMIN_ROLE) { _unpause(); }\r\n\r\n    // ---- Contribute (no allowlist) ----\r\n    function contribute(uint256 amount) external nonReentrant whenNotPaused {\r\n        if (allowlistEnabled) revert AllowlistRequired();\r\n        _contribute(msg.sender, amount);\r\n        emit Contributed(msg.sender, amount, totalContributed);\r\n    }\r\n\r\n    // ---- Contribute (allowlisted) ----\r\n    function contributeAllowlisted(uint256 amount, bytes32[] calldata proof)\r\n        external\r\n        nonReentrant\r\n        whenNotPaused\r\n    {\r\n        if (!allowlistEnabled) revert AllowlistRequired();\r\n        bytes32 leaf = keccak256(abi.encodePacked(msg.sender));\r\n        if (!MerkleProof.verify(proof, allowlistRoot, leaf)) revert InvalidProof();\r\n        _contribute(msg.sender, amount);\r\n        emit ContributedAllowlisted(msg.sender, amount, totalContributed);\r\n    }\r\n\r\n    // ---- Refund / Withdraw ----\r\n    function refund(uint256 amount) external nonReentrant {\r\n        if (block.timestamp < end) revert RefundNotAllowed();\r\n        if (campaignSuccessful()) revert SoftCapReached();\r\n        if (amount == 0) revert ZeroAmount();\r\n\r\n        uint256 deposited = contributed[msg.sender];\r\n        if (deposited == 0) revert NothingToRefund();\r\n        if (amount > deposited) amount = deposited;\r\n\r\n        contributed[msg.sender] = deposited - amount;\r\n        totalContributed -= amount;\r\n\r\n        token.safeTransfer(msg.sender, amount);\r\n        emit Refunded(msg.sender, amount);\r\n    }\r\n\r\n    function withdraw(uint256 amount) external nonReentrant onlyRole(TREASURER_ROLE) {\r\n        if (treasury == address(0)) revert TreasuryNotSet();\r\n        if (block.timestamp < end) revert RefundNotAllowed();\r\n        if (!campaignSuccessful()) revert SoftCapNotReached();\r\n        if (amount == 0) revert ZeroAmount();\r\n\r\n        token.safeTransfer(treasury, amount);\r\n        emit Withdrawn(treasury, amount);\r\n    }\r\n\r\n    // ---- Internal ----\r\n    function _contribute(address sender, uint256 amount) internal {\r\n        if (amount == 0) revert ZeroAmount();\r\n        if (block.timestamp < start) revert CampaignNotStarted();\r\n        if (block.timestamp >= end) revert CampaignEnded();\r\n\r\n        uint256 newTotal = totalContributed + amount;\r\n        if (newTotal > hardCap) revert CapExceeded();\r\n\r\n        contributed[sender] += amount;\r\n        totalContributed = newTotal;\r\n\r\n        // NOTE: will revert if allowance is insufficient\r\n        token.safeTransferFrom(sender, address(this), amount);\r\n    }\r\n\r\n    // ---- Required by AccessControl ----\r\n    function supportsInterface(bytes4 interfaceId)\r\n        public\r\n        view\r\n        override(AccessControl)\r\n        returns (bool)\r\n    {\r\n        return super.supportsInterface(interfaceId);\r\n    }\r\n\r\n    // ---- Fallbacks ----\r\n    receive() external payable { revert(); }\r\n    fallback() external payable { revert(); }\r\n}\r\n"},"@openzeppelin/contracts/utils/cryptography/MerkleProof.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/cryptography/MerkleProof.sol)\n// This file was procedurally generated from scripts/generate/templates/MerkleProof.js.\n\npragma solidity ^0.8.20;\n\nimport {Hashes} from \"./Hashes.sol\";\n\n/**\n * @dev These functions deal with verification of Merkle Tree proofs.\n *\n * The tree and the proofs can be generated using our\n * https://github.com/OpenZeppelin/merkle-tree[JavaScript library].\n * You will find a quickstart guide in the readme.\n *\n * WARNING: You should avoid using leaf values that are 64 bytes long prior to\n * hashing, or use a hash function other than keccak256 for hashing leaves.\n * This is because the concatenation of a sorted pair of internal nodes in\n * the Merkle tree could be reinterpreted as a leaf value.\n * OpenZeppelin's JavaScript library generates Merkle trees that are safe\n * against this attack out of the box.\n *\n * IMPORTANT: Consider memory side-effects when using custom hashing functions\n * that access memory in an unsafe way.\n *\n * NOTE: This library supports proof verification for merkle trees built using\n * custom _commutative_ hashing functions (i.e. `H(a, b) == H(b, a)`). Proving\n * leaf inclusion in trees built using non-commutative hashing functions requires\n * additional logic that is not supported by this library.\n */\nlibrary MerkleProof {\n    /**\n     *@dev The multiproof provided is not valid.\n     */\n    error MerkleProofInvalidMultiproof();\n\n    /**\n     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree\n     * defined by `root`. For this, a `proof` must be provided, containing\n     * sibling hashes on the branch from the leaf to the root of the tree. Each\n     * pair of leaves and each pair of pre-images are assumed to be sorted.\n     *\n     * This version handles proofs in memory with the default hashing function.\n     */\n    function verify(bytes32[] memory proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {\n        return processProof(proof, leaf) == root;\n    }\n\n    /**\n     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up\n     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt\n     * hash matches the root of the tree. When processing the proof, the pairs\n     * of leaves & pre-images are assumed to be sorted.\n     *\n     * This version handles proofs in memory with the default hashing function.\n     */\n    function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {\n        bytes32 computedHash = leaf;\n        for (uint256 i = 0; i < proof.length; i++) {\n            computedHash = Hashes.commutativeKeccak256(computedHash, proof[i]);\n        }\n        return computedHash;\n    }\n\n    /**\n     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree\n     * defined by `root`. For this, a `proof` must be provided, containing\n     * sibling hashes on the branch from the leaf to the root of the tree. Each\n     * pair of leaves and each pair of pre-images are assumed to be sorted.\n     *\n     * This version handles proofs in memory with a custom hashing function.\n     */\n    function verify(\n        bytes32[] memory proof,\n        bytes32 root,\n        bytes32 leaf,\n        function(bytes32, bytes32) view returns (bytes32) hasher\n    ) internal view returns (bool) {\n        return processProof(proof, leaf, hasher) == root;\n    }\n\n    /**\n     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up\n     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt\n     * hash matches the root of the tree. When processing the proof, the pairs\n     * of leaves & pre-images are assumed to be sorted.\n     *\n     * This version handles proofs in memory with a custom hashing function.\n     */\n    function processProof(\n        bytes32[] memory proof,\n        bytes32 leaf,\n        function(bytes32, bytes32) view returns (bytes32) hasher\n    ) internal view returns (bytes32) {\n        bytes32 computedHash = leaf;\n        for (uint256 i = 0; i < proof.length; i++) {\n            computedHash = hasher(computedHash, proof[i]);\n        }\n        return computedHash;\n    }\n\n    /**\n     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree\n     * defined by `root`. For this, a `proof` must be provided, containing\n     * sibling hashes on the branch from the leaf to the root of the tree. Each\n     * pair of leaves and each pair of pre-images are assumed to be sorted.\n     *\n     * This version handles proofs in calldata with the default hashing function.\n     */\n    function verifyCalldata(bytes32[] calldata proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {\n        return processProofCalldata(proof, leaf) == root;\n    }\n\n    /**\n     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up\n     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt\n     * hash matches the root of the tree. When processing the proof, the pairs\n     * of leaves & pre-images are assumed to be sorted.\n     *\n     * This version handles proofs in calldata with the default hashing function.\n     */\n    function processProofCalldata(bytes32[] calldata proof, bytes32 leaf) internal pure returns (bytes32) {\n        bytes32 computedHash = leaf;\n        for (uint256 i = 0; i < proof.length; i++) {\n            computedHash = Hashes.commutativeKeccak256(computedHash, proof[i]);\n        }\n        return computedHash;\n    }\n\n    /**\n     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree\n     * defined by `root`. For this, a `proof` must be provided, containing\n     * sibling hashes on the branch from the leaf to the root of the tree. Each\n     * pair of leaves and each pair of pre-images are assumed to be sorted.\n     *\n     * This version handles proofs in calldata with a custom hashing function.\n     */\n    function verifyCalldata(\n        bytes32[] calldata proof,\n        bytes32 root,\n        bytes32 leaf,\n        function(bytes32, bytes32) view returns (bytes32) hasher\n    ) internal view returns (bool) {\n        return processProofCalldata(proof, leaf, hasher) == root;\n    }\n\n    /**\n     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up\n     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt\n     * hash matches the root of the tree. When processing the proof, the pairs\n     * of leaves & pre-images are assumed to be sorted.\n     *\n     * This version handles proofs in calldata with a custom hashing function.\n     */\n    function processProofCalldata(\n        bytes32[] calldata proof,\n        bytes32 leaf,\n        function(bytes32, bytes32) view returns (bytes32) hasher\n    ) internal view returns (bytes32) {\n        bytes32 computedHash = leaf;\n        for (uint256 i = 0; i < proof.length; i++) {\n            computedHash = hasher(computedHash, proof[i]);\n        }\n        return computedHash;\n    }\n\n    /**\n     * @dev Returns true if the `leaves` can be simultaneously proven to be a part of a Merkle tree defined by\n     * `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.\n     *\n     * This version handles multiproofs in memory with the default hashing function.\n     *\n     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.\n     *\n     * NOTE: Consider the case where `root == proof[0] && leaves.length == 0` as it will return `true`.\n     * The `leaves` must be validated independently. See {processMultiProof}.\n     */\n    function multiProofVerify(\n        bytes32[] memory proof,\n        bool[] memory proofFlags,\n        bytes32 root,\n        bytes32[] memory leaves\n    ) internal pure returns (bool) {\n        return processMultiProof(proof, proofFlags, leaves) == root;\n    }\n\n    /**\n     * @dev Returns the root of a tree reconstructed from `leaves` and sibling nodes in `proof`. The reconstruction\n     * proceeds by incrementally reconstructing all inner nodes by combining a leaf/inner node with either another\n     * leaf/inner node or a proof sibling node, depending on whether each `proofFlags` item is true or false\n     * respectively.\n     *\n     * This version handles multiproofs in memory with the default hashing function.\n     *\n     * CAUTION: Not all Merkle trees admit multiproofs. To use multiproofs, it is sufficient to ensure that: 1) the tree\n     * is complete (but not necessarily perfect), 2) the leaves to be proven are in the opposite order they are in the\n     * tree (i.e., as seen from right to left starting at the deepest layer and continuing at the next layer).\n     *\n     * NOTE: The _empty set_ (i.e. the case where `proof.length == 1 && leaves.length == 0`) is considered a no-op,\n     * and therefore a valid multiproof (i.e. it returns `proof[0]`). Consider disallowing this case if you're not\n     * validating the leaves elsewhere.\n     */\n    function processMultiProof(\n        bytes32[] memory proof,\n        bool[] memory proofFlags,\n        bytes32[] memory leaves\n    ) internal pure returns (bytes32 merkleRoot) {\n        // This function rebuilds the root hash by traversing the tree up from the leaves. The root is rebuilt by\n        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the\n        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of\n        // the Merkle tree.\n        uint256 leavesLen = leaves.length;\n        uint256 proofFlagsLen = proofFlags.length;\n\n        // Check proof validity.\n        if (leavesLen + proof.length != proofFlagsLen + 1) {\n            revert MerkleProofInvalidMultiproof();\n        }\n\n        // The xxxPos values are \"pointers\" to the next value to consume in each array. All accesses are done using\n        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's \"pop\".\n        bytes32[] memory hashes = new bytes32[](proofFlagsLen);\n        uint256 leafPos = 0;\n        uint256 hashPos = 0;\n        uint256 proofPos = 0;\n        // At each step, we compute the next hash using two values:\n        // - a value from the \"main queue\". If not all leaves have been consumed, we get the next leaf, otherwise we\n        //   get the next hash.\n        // - depending on the flag, either another value from the \"main queue\" (merging branches) or an element from the\n        //   `proof` array.\n        for (uint256 i = 0; i < proofFlagsLen; i++) {\n            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];\n            bytes32 b = proofFlags[i]\n                ? (leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++])\n                : proof[proofPos++];\n            hashes[i] = Hashes.commutativeKeccak256(a, b);\n        }\n\n        if (proofFlagsLen > 0) {\n            if (proofPos != proof.length) {\n                revert MerkleProofInvalidMultiproof();\n            }\n            unchecked {\n                return hashes[proofFlagsLen - 1];\n            }\n        } else if (leavesLen > 0) {\n            return leaves[0];\n        } else {\n            return proof[0];\n        }\n    }\n\n    /**\n     * @dev Returns true if the `leaves` can be simultaneously proven to be a part of a Merkle tree defined by\n     * `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.\n     *\n     * This version handles multiproofs in memory with a custom hashing function.\n     *\n     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.\n     *\n     * NOTE: Consider the case where `root == proof[0] && leaves.length == 0` as it will return `true`.\n     * The `leaves` must be validated independently. See {processMultiProof}.\n     */\n    function multiProofVerify(\n        bytes32[] memory proof,\n        bool[] memory proofFlags,\n        bytes32 root,\n        bytes32[] memory leaves,\n        function(bytes32, bytes32) view returns (bytes32) hasher\n    ) internal view returns (bool) {\n        return processMultiProof(proof, proofFlags, leaves, hasher) == root;\n    }\n\n    /**\n     * @dev Returns the root of a tree reconstructed from `leaves` and sibling nodes in `proof`. The reconstruction\n     * proceeds by incrementally reconstructing all inner nodes by combining a leaf/inner node with either another\n     * leaf/inner node or a proof sibling node, depending on whether each `proofFlags` item is true or false\n     * respectively.\n     *\n     * This version handles multiproofs in memory with a custom hashing function.\n     *\n     * CAUTION: Not all Merkle trees admit multiproofs. To use multiproofs, it is sufficient to ensure that: 1) the tree\n     * is complete (but not necessarily perfect), 2) the leaves to be proven are in the opposite order they are in the\n     * tree (i.e., as seen from right to left starting at the deepest layer and continuing at the next layer).\n     *\n     * NOTE: The _empty set_ (i.e. the case where `proof.length == 1 && leaves.length == 0`) is considered a no-op,\n     * and therefore a valid multiproof (i.e. it returns `proof[0]`). Consider disallowing this case if you're not\n     * validating the leaves elsewhere.\n     */\n    function processMultiProof(\n        bytes32[] memory proof,\n        bool[] memory proofFlags,\n        bytes32[] memory leaves,\n        function(bytes32, bytes32) view returns (bytes32) hasher\n    ) internal view returns (bytes32 merkleRoot) {\n        // This function rebuilds the root hash by traversing the tree up from the leaves. The root is rebuilt by\n        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the\n        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of\n        // the Merkle tree.\n        uint256 leavesLen = leaves.length;\n        uint256 proofFlagsLen = proofFlags.length;\n\n        // Check proof validity.\n        if (leavesLen + proof.length != proofFlagsLen + 1) {\n            revert MerkleProofInvalidMultiproof();\n        }\n\n        // The xxxPos values are \"pointers\" to the next value to consume in each array. All accesses are done using\n        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's \"pop\".\n        bytes32[] memory hashes = new bytes32[](proofFlagsLen);\n        uint256 leafPos = 0;\n        uint256 hashPos = 0;\n        uint256 proofPos = 0;\n        // At each step, we compute the next hash using two values:\n        // - a value from the \"main queue\". If not all leaves have been consumed, we get the next leaf, otherwise we\n        //   get the next hash.\n        // - depending on the flag, either another value from the \"main queue\" (merging branches) or an element from the\n        //   `proof` array.\n        for (uint256 i = 0; i < proofFlagsLen; i++) {\n            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];\n            bytes32 b = proofFlags[i]\n                ? (leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++])\n                : proof[proofPos++];\n            hashes[i] = hasher(a, b);\n        }\n\n        if (proofFlagsLen > 0) {\n            if (proofPos != proof.length) {\n                revert MerkleProofInvalidMultiproof();\n            }\n            unchecked {\n                return hashes[proofFlagsLen - 1];\n            }\n        } else if (leavesLen > 0) {\n            return leaves[0];\n        } else {\n            return proof[0];\n        }\n    }\n\n    /**\n     * @dev Returns true if the `leaves` can be simultaneously proven to be a part of a Merkle tree defined by\n     * `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.\n     *\n     * This version handles multiproofs in calldata with the default hashing function.\n     *\n     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.\n     *\n     * NOTE: Consider the case where `root == proof[0] && leaves.length == 0` as it will return `true`.\n     * The `leaves` must be validated independently. See {processMultiProofCalldata}.\n     */\n    function multiProofVerifyCalldata(\n        bytes32[] calldata proof,\n        bool[] calldata proofFlags,\n        bytes32 root,\n        bytes32[] memory leaves\n    ) internal pure returns (bool) {\n        return processMultiProofCalldata(proof, proofFlags, leaves) == root;\n    }\n\n    /**\n     * @dev Returns the root of a tree reconstructed from `leaves` and sibling nodes in `proof`. The reconstruction\n     * proceeds by incrementally reconstructing all inner nodes by combining a leaf/inner node with either another\n     * leaf/inner node or a proof sibling node, depending on whether each `proofFlags` item is true or false\n     * respectively.\n     *\n     * This version handles multiproofs in calldata with the default hashing function.\n     *\n     * CAUTION: Not all Merkle trees admit multiproofs. To use multiproofs, it is sufficient to ensure that: 1) the tree\n     * is complete (but not necessarily perfect), 2) the leaves to be proven are in the opposite order they are in the\n     * tree (i.e., as seen from right to left starting at the deepest layer and continuing at the next layer).\n     *\n     * NOTE: The _empty set_ (i.e. the case where `proof.length == 1 && leaves.length == 0`) is considered a no-op,\n     * and therefore a valid multiproof (i.e. it returns `proof[0]`). Consider disallowing this case if you're not\n     * validating the leaves elsewhere.\n     */\n    function processMultiProofCalldata(\n        bytes32[] calldata proof,\n        bool[] calldata proofFlags,\n        bytes32[] memory leaves\n    ) internal pure returns (bytes32 merkleRoot) {\n        // This function rebuilds the root hash by traversing the tree up from the leaves. The root is rebuilt by\n        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the\n        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of\n        // the Merkle tree.\n        uint256 leavesLen = leaves.length;\n        uint256 proofFlagsLen = proofFlags.length;\n\n        // Check proof validity.\n        if (leavesLen + proof.length != proofFlagsLen + 1) {\n            revert MerkleProofInvalidMultiproof();\n        }\n\n        // The xxxPos values are \"pointers\" to the next value to consume in each array. All accesses are done using\n        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's \"pop\".\n        bytes32[] memory hashes = new bytes32[](proofFlagsLen);\n        uint256 leafPos = 0;\n        uint256 hashPos = 0;\n        uint256 proofPos = 0;\n        // At each step, we compute the next hash using two values:\n        // - a value from the \"main queue\". If not all leaves have been consumed, we get the next leaf, otherwise we\n        //   get the next hash.\n        // - depending on the flag, either another value from the \"main queue\" (merging branches) or an element from the\n        //   `proof` array.\n        for (uint256 i = 0; i < proofFlagsLen; i++) {\n            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];\n            bytes32 b = proofFlags[i]\n                ? (leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++])\n                : proof[proofPos++];\n            hashes[i] = Hashes.commutativeKeccak256(a, b);\n        }\n\n        if (proofFlagsLen > 0) {\n            if (proofPos != proof.length) {\n                revert MerkleProofInvalidMultiproof();\n            }\n            unchecked {\n                return hashes[proofFlagsLen - 1];\n            }\n        } else if (leavesLen > 0) {\n            return leaves[0];\n        } else {\n            return proof[0];\n        }\n    }\n\n    /**\n     * @dev Returns true if the `leaves` can be simultaneously proven to be a part of a Merkle tree defined by\n     * `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.\n     *\n     * This version handles multiproofs in calldata with a custom hashing function.\n     *\n     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.\n     *\n     * NOTE: Consider the case where `root == proof[0] && leaves.length == 0` as it will return `true`.\n     * The `leaves` must be validated independently. See {processMultiProofCalldata}.\n     */\n    function multiProofVerifyCalldata(\n        bytes32[] calldata proof,\n        bool[] calldata proofFlags,\n        bytes32 root,\n        bytes32[] memory leaves,\n        function(bytes32, bytes32) view returns (bytes32) hasher\n    ) internal view returns (bool) {\n        return processMultiProofCalldata(proof, proofFlags, leaves, hasher) == root;\n    }\n\n    /**\n     * @dev Returns the root of a tree reconstructed from `leaves` and sibling nodes in `proof`. The reconstruction\n     * proceeds by incrementally reconstructing all inner nodes by combining a leaf/inner node with either another\n     * leaf/inner node or a proof sibling node, depending on whether each `proofFlags` item is true or false\n     * respectively.\n     *\n     * This version handles multiproofs in calldata with a custom hashing function.\n     *\n     * CAUTION: Not all Merkle trees admit multiproofs. To use multiproofs, it is sufficient to ensure that: 1) the tree\n     * is complete (but not necessarily perfect), 2) the leaves to be proven are in the opposite order they are in the\n     * tree (i.e., as seen from right to left starting at the deepest layer and continuing at the next layer).\n     *\n     * NOTE: The _empty set_ (i.e. the case where `proof.length == 1 && leaves.length == 0`) is considered a no-op,\n     * and therefore a valid multiproof (i.e. it returns `proof[0]`). Consider disallowing this case if you're not\n     * validating the leaves elsewhere.\n     */\n    function processMultiProofCalldata(\n        bytes32[] calldata proof,\n        bool[] calldata proofFlags,\n        bytes32[] memory leaves,\n        function(bytes32, bytes32) view returns (bytes32) hasher\n    ) internal view returns (bytes32 merkleRoot) {\n        // This function rebuilds the root hash by traversing the tree up from the leaves. The root is rebuilt by\n        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the\n        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of\n        // the Merkle tree.\n        uint256 leavesLen = leaves.length;\n        uint256 proofFlagsLen = proofFlags.length;\n\n        // Check proof validity.\n        if (leavesLen + proof.length != proofFlagsLen + 1) {\n            revert MerkleProofInvalidMultiproof();\n        }\n\n        // The xxxPos values are \"pointers\" to the next value to consume in each array. All accesses are done using\n        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's \"pop\".\n        bytes32[] memory hashes = new bytes32[](proofFlagsLen);\n        uint256 leafPos = 0;\n        uint256 hashPos = 0;\n        uint256 proofPos = 0;\n        // At each step, we compute the next hash using two values:\n        // - a value from the \"main queue\". If not all leaves have been consumed, we get the next leaf, otherwise we\n        //   get the next hash.\n        // - depending on the flag, either another value from the \"main queue\" (merging branches) or an element from the\n        //   `proof` array.\n        for (uint256 i = 0; i < proofFlagsLen; i++) {\n            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];\n            bytes32 b = proofFlags[i]\n                ? (leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++])\n                : proof[proofPos++];\n            hashes[i] = hasher(a, b);\n        }\n\n        if (proofFlagsLen > 0) {\n            if (proofPos != proof.length) {\n                revert MerkleProofInvalidMultiproof();\n            }\n            unchecked {\n                return hashes[proofFlagsLen - 1];\n            }\n        } else if (leavesLen > 0) {\n            return leaves[0];\n        } else {\n            return proof[0];\n        }\n    }\n}\n"},"@openzeppelin/contracts/utils/Pausable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (utils/Pausable.sol)\n\npragma solidity ^0.8.20;\n\nimport {Context} from \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which allows children to implement an emergency stop\n * mechanism that can be triggered by an authorized account.\n *\n * This module is used through inheritance. It will make available the\n * modifiers `whenNotPaused` and `whenPaused`, which can be applied to\n * the functions of your contract. Note that they will not be pausable by\n * simply including this module, only once the modifiers are put in place.\n */\nabstract contract Pausable is Context {\n    bool private _paused;\n\n    /**\n     * @dev Emitted when the pause is triggered by `account`.\n     */\n    event Paused(address account);\n\n    /**\n     * @dev Emitted when the pause is lifted by `account`.\n     */\n    event Unpaused(address account);\n\n    /**\n     * @dev The operation failed because the contract is paused.\n     */\n    error EnforcedPause();\n\n    /**\n     * @dev The operation failed because the contract is not paused.\n     */\n    error ExpectedPause();\n\n    /**\n     * @dev Modifier to make a function callable only when the contract is not paused.\n     *\n     * Requirements:\n     *\n     * - The contract must not be paused.\n     */\n    modifier whenNotPaused() {\n        _requireNotPaused();\n        _;\n    }\n\n    /**\n     * @dev Modifier to make a function callable only when the contract is paused.\n     *\n     * Requirements:\n     *\n     * - The contract must be paused.\n     */\n    modifier whenPaused() {\n        _requirePaused();\n        _;\n    }\n\n    /**\n     * @dev Returns true if the contract is paused, and false otherwise.\n     */\n    function paused() public view virtual returns (bool) {\n        return _paused;\n    }\n\n    /**\n     * @dev Throws if the contract is paused.\n     */\n    function _requireNotPaused() internal view virtual {\n        if (paused()) {\n            revert EnforcedPause();\n        }\n    }\n\n    /**\n     * @dev Throws if the contract is not paused.\n     */\n    function _requirePaused() internal view virtual {\n        if (!paused()) {\n            revert ExpectedPause();\n        }\n    }\n\n    /**\n     * @dev Triggers stopped state.\n     *\n     * Requirements:\n     *\n     * - The contract must not be paused.\n     */\n    function _pause() internal virtual whenNotPaused {\n        _paused = true;\n        emit Paused(_msgSender());\n    }\n\n    /**\n     * @dev Returns to normal state.\n     *\n     * Requirements:\n     *\n     * - The contract must be paused.\n     */\n    function _unpause() internal virtual whenPaused {\n        _paused = false;\n        emit Unpaused(_msgSender());\n    }\n}\n"},"@openzeppelin/contracts/access/AccessControl.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (access/AccessControl.sol)\n\npragma solidity ^0.8.20;\n\nimport {IAccessControl} from \"./IAccessControl.sol\";\nimport {Context} from \"../utils/Context.sol\";\nimport {IERC165, ERC165} from \"../utils/introspection/ERC165.sol\";\n\n/**\n * @dev Contract module that allows children to implement role-based access\n * control mechanisms. This is a lightweight version that doesn't allow enumerating role\n * members except through off-chain means by accessing the contract event logs. Some\n * applications may benefit from on-chain enumerability, for those cases see\n * {AccessControlEnumerable}.\n *\n * Roles are referred to by their `bytes32` identifier. These should be exposed\n * in the external API and be unique. The best way to achieve this is by\n * using `public constant` hash digests:\n *\n * ```solidity\n * bytes32 public constant MY_ROLE = keccak256(\"MY_ROLE\");\n * ```\n *\n * Roles can be used to represent a set of permissions. To restrict access to a\n * function call, use {hasRole}:\n *\n * ```solidity\n * function foo() public {\n *     require(hasRole(MY_ROLE, msg.sender));\n *     ...\n * }\n * ```\n *\n * Roles can be granted and revoked dynamically via the {grantRole} and\n * {revokeRole} functions. Each role has an associated admin role, and only\n * accounts that have a role's admin role can call {grantRole} and {revokeRole}.\n *\n * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means\n * that only accounts with this role will be able to grant or revoke other\n * roles. More complex role relationships can be created by using\n * {_setRoleAdmin}.\n *\n * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to\n * grant and revoke this role. Extra precautions should be taken to secure\n * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}\n * to enforce additional security measures for this role.\n */\nabstract contract AccessControl is Context, IAccessControl, ERC165 {\n    struct RoleData {\n        mapping(address account => bool) hasRole;\n        bytes32 adminRole;\n    }\n\n    mapping(bytes32 role => RoleData) private _roles;\n\n    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;\n\n    /**\n     * @dev Modifier that checks that an account has a specific role. Reverts\n     * with an {AccessControlUnauthorizedAccount} error including the required role.\n     */\n    modifier onlyRole(bytes32 role) {\n        _checkRole(role);\n        _;\n    }\n\n    /// @inheritdoc IERC165\n    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev Returns `true` if `account` has been granted `role`.\n     */\n    function hasRole(bytes32 role, address account) public view virtual returns (bool) {\n        return _roles[role].hasRole[account];\n    }\n\n    /**\n     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `_msgSender()`\n     * is missing `role`. Overriding this function changes the behavior of the {onlyRole} modifier.\n     */\n    function _checkRole(bytes32 role) internal view virtual {\n        _checkRole(role, _msgSender());\n    }\n\n    /**\n     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `account`\n     * is missing `role`.\n     */\n    function _checkRole(bytes32 role, address account) internal view virtual {\n        if (!hasRole(role, account)) {\n            revert AccessControlUnauthorizedAccount(account, role);\n        }\n    }\n\n    /**\n     * @dev Returns the admin role that controls `role`. See {grantRole} and\n     * {revokeRole}.\n     *\n     * To change a role's admin, use {_setRoleAdmin}.\n     */\n    function getRoleAdmin(bytes32 role) public view virtual returns (bytes32) {\n        return _roles[role].adminRole;\n    }\n\n    /**\n     * @dev Grants `role` to `account`.\n     *\n     * If `account` had not been already granted `role`, emits a {RoleGranted}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     *\n     * May emit a {RoleGranted} event.\n     */\n    function grantRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {\n        _grantRole(role, account);\n    }\n\n    /**\n     * @dev Revokes `role` from `account`.\n     *\n     * If `account` had been granted `role`, emits a {RoleRevoked} event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     *\n     * May emit a {RoleRevoked} event.\n     */\n    function revokeRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {\n        _revokeRole(role, account);\n    }\n\n    /**\n     * @dev Revokes `role` from the calling account.\n     *\n     * Roles are often managed via {grantRole} and {revokeRole}: this function's\n     * purpose is to provide a mechanism for accounts to lose their privileges\n     * if they are compromised (such as when a trusted device is misplaced).\n     *\n     * If the calling account had been revoked `role`, emits a {RoleRevoked}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must be `callerConfirmation`.\n     *\n     * May emit a {RoleRevoked} event.\n     */\n    function renounceRole(bytes32 role, address callerConfirmation) public virtual {\n        if (callerConfirmation != _msgSender()) {\n            revert AccessControlBadConfirmation();\n        }\n\n        _revokeRole(role, callerConfirmation);\n    }\n\n    /**\n     * @dev Sets `adminRole` as ``role``'s admin role.\n     *\n     * Emits a {RoleAdminChanged} event.\n     */\n    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {\n        bytes32 previousAdminRole = getRoleAdmin(role);\n        _roles[role].adminRole = adminRole;\n        emit RoleAdminChanged(role, previousAdminRole, adminRole);\n    }\n\n    /**\n     * @dev Attempts to grant `role` to `account` and returns a boolean indicating if `role` was granted.\n     *\n     * Internal function without access restriction.\n     *\n     * May emit a {RoleGranted} event.\n     */\n    function _grantRole(bytes32 role, address account) internal virtual returns (bool) {\n        if (!hasRole(role, account)) {\n            _roles[role].hasRole[account] = true;\n            emit RoleGranted(role, account, _msgSender());\n            return true;\n        } else {\n            return false;\n        }\n    }\n\n    /**\n     * @dev Attempts to revoke `role` from `account` and returns a boolean indicating if `role` was revoked.\n     *\n     * Internal function without access restriction.\n     *\n     * May emit a {RoleRevoked} event.\n     */\n    function _revokeRole(bytes32 role, address account) internal virtual returns (bool) {\n        if (hasRole(role, account)) {\n            _roles[role].hasRole[account] = false;\n            emit RoleRevoked(role, account, _msgSender());\n            return true;\n        } else {\n            return false;\n        }\n    }\n}\n"},"@openzeppelin/contracts/access/Ownable2Step.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (access/Ownable2Step.sol)\n\npragma solidity ^0.8.20;\n\nimport {Ownable} from \"./Ownable.sol\";\n\n/**\n * @dev Contract module which provides access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * This extension of the {Ownable} contract includes a two-step mechanism to transfer\n * ownership, where the new owner must call {acceptOwnership} in order to replace the\n * old one. This can help prevent common mistakes, such as transfers of ownership to\n * incorrect accounts, or to contracts that are unable to interact with the\n * permission system.\n *\n * The initial owner is specified at deployment time in the constructor for `Ownable`. This\n * can later be changed with {transferOwnership} and {acceptOwnership}.\n *\n * This module is used through inheritance. It will make available all functions\n * from parent (Ownable).\n */\nabstract contract Ownable2Step is Ownable {\n    address private _pendingOwner;\n\n    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Returns the address of the pending owner.\n     */\n    function pendingOwner() public view virtual returns (address) {\n        return _pendingOwner;\n    }\n\n    /**\n     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.\n     * Can only be called by the current owner.\n     *\n     * Setting `newOwner` to the zero address is allowed; this can be used to cancel an initiated ownership transfer.\n     */\n    function transferOwnership(address newOwner) public virtual override onlyOwner {\n        _pendingOwner = newOwner;\n        emit OwnershipTransferStarted(owner(), newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual override {\n        delete _pendingOwner;\n        super._transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev The new owner accepts the ownership transfer.\n     */\n    function acceptOwnership() public virtual {\n        address sender = _msgSender();\n        if (pendingOwner() != sender) {\n            revert OwnableUnauthorizedAccount(sender);\n        }\n        _transferOwnership(sender);\n    }\n}\n"},"@openzeppelin/contracts/utils/ReentrancyGuard.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/ReentrancyGuard.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Contract module that helps prevent reentrant calls to a function.\n *\n * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier\n * available, which can be applied to functions to make sure there are no nested\n * (reentrant) calls to them.\n *\n * Note that because there is a single `nonReentrant` guard, functions marked as\n * `nonReentrant` may not call one another. This can be worked around by making\n * those functions `private`, and then adding `external` `nonReentrant` entry\n * points to them.\n *\n * TIP: If EIP-1153 (transient storage) is available on the chain you're deploying at,\n * consider using {ReentrancyGuardTransient} instead.\n *\n * TIP: If you would like to learn more about reentrancy and alternative ways\n * to protect against it, check out our blog post\n * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].\n */\nabstract contract ReentrancyGuard {\n    // Booleans are more expensive than uint256 or any type that takes up a full\n    // word because each write operation emits an extra SLOAD to first read the\n    // slot's contents, replace the bits taken up by the boolean, and then write\n    // back. This is the compiler's defense against contract upgrades and\n    // pointer aliasing, and it cannot be disabled.\n\n    // The values being non-zero value makes deployment a bit more expensive,\n    // but in exchange the refund on every call to nonReentrant will be lower in\n    // amount. Since refunds are capped to a percentage of the total\n    // transaction's gas, it is best to keep them low in cases like this one, to\n    // increase the likelihood of the full refund coming into effect.\n    uint256 private constant NOT_ENTERED = 1;\n    uint256 private constant ENTERED = 2;\n\n    uint256 private _status;\n\n    /**\n     * @dev Unauthorized reentrant call.\n     */\n    error ReentrancyGuardReentrantCall();\n\n    constructor() {\n        _status = NOT_ENTERED;\n    }\n\n    /**\n     * @dev Prevents a contract from calling itself, directly or indirectly.\n     * Calling a `nonReentrant` function from another `nonReentrant`\n     * function is not supported. It is possible to prevent this from happening\n     * by making the `nonReentrant` function external, and making it call a\n     * `private` function that does the actual work.\n     */\n    modifier nonReentrant() {\n        _nonReentrantBefore();\n        _;\n        _nonReentrantAfter();\n    }\n\n    function _nonReentrantBefore() private {\n        // On the first call to nonReentrant, _status will be NOT_ENTERED\n        if (_status == ENTERED) {\n            revert ReentrancyGuardReentrantCall();\n        }\n\n        // Any calls to nonReentrant after this point will fail\n        _status = ENTERED;\n    }\n\n    function _nonReentrantAfter() private {\n        // By storing the original value once again, a refund is triggered (see\n        // https://eips.ethereum.org/EIPS/eip-2200)\n        _status = NOT_ENTERED;\n    }\n\n    /**\n     * @dev Returns true if the reentrancy guard is currently set to \"entered\", which indicates there is a\n     * `nonReentrant` function in the call stack.\n     */\n    function _reentrancyGuardEntered() internal view returns (bool) {\n        return _status == ENTERED;\n    }\n}\n"},"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"../IERC20.sol\";\nimport {IERC1363} from \"../../../interfaces/IERC1363.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC-20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n    /**\n     * @dev An operation with an ERC-20 token failed.\n     */\n    error SafeERC20FailedOperation(address token);\n\n    /**\n     * @dev Indicates a failed `decreaseAllowance` request.\n     */\n    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);\n\n    /**\n     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     */\n    function safeTransfer(IERC20 token, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));\n    }\n\n    /**\n     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the\n     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.\n     */\n    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));\n    }\n\n    /**\n     * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.\n     */\n    function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {\n        return _callOptionalReturnBool(token, abi.encodeCall(token.transfer, (to, value)));\n    }\n\n    /**\n     * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.\n     */\n    function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {\n        return _callOptionalReturnBool(token, abi.encodeCall(token.transferFrom, (from, to, value)));\n    }\n\n    /**\n     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     *\n     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the \"client\"\n     * smart contract uses ERC-7674 to set temporary allowances, then the \"client\" smart contract should avoid using\n     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract\n     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.\n     */\n    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n        uint256 oldAllowance = token.allowance(address(this), spender);\n        forceApprove(token, spender, oldAllowance + value);\n    }\n\n    /**\n     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no\n     * value, non-reverting calls are assumed to be successful.\n     *\n     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the \"client\"\n     * smart contract uses ERC-7674 to set temporary allowances, then the \"client\" smart contract should avoid using\n     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract\n     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.\n     */\n    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {\n        unchecked {\n            uint256 currentAllowance = token.allowance(address(this), spender);\n            if (currentAllowance < requestedDecrease) {\n                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);\n            }\n            forceApprove(token, spender, currentAllowance - requestedDecrease);\n        }\n    }\n\n    /**\n     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval\n     * to be set to zero before setting it to a non-zero value, such as USDT.\n     *\n     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function\n     * only sets the \"standard\" allowance. Any temporary allowance will remain active, in addition to the value being\n     * set here.\n     */\n    function forceApprove(IERC20 token, address spender, uint256 value) internal {\n        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));\n\n        if (!_callOptionalReturnBool(token, approvalCall)) {\n            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));\n            _callOptionalReturn(token, approvalCall);\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no\n     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {\n        if (to.code.length == 0) {\n            safeTransfer(token, to, value);\n        } else if (!token.transferAndCall(to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target\n     * has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function transferFromAndCallRelaxed(\n        IERC1363 token,\n        address from,\n        address to,\n        uint256 value,\n        bytes memory data\n    ) internal {\n        if (to.code.length == 0) {\n            safeTransferFrom(token, from, to, value);\n        } else if (!token.transferFromAndCall(from, to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no\n     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.\n     * Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}\n     * once without retrying, and relies on the returned value to be true.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {\n        if (to.code.length == 0) {\n            forceApprove(token, to, value);\n        } else if (!token.approveAndCall(to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     *\n     * This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.\n     */\n    function _callOptionalReturn(IERC20 token, bytes memory data) private {\n        uint256 returnSize;\n        uint256 returnValue;\n        assembly (\"memory-safe\") {\n            let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)\n            // bubble errors\n            if iszero(success) {\n                let ptr := mload(0x40)\n                returndatacopy(ptr, 0, returndatasize())\n                revert(ptr, returndatasize())\n            }\n            returnSize := returndatasize()\n            returnValue := mload(0)\n        }\n\n        if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     *\n     * This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.\n     */\n    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {\n        bool success;\n        uint256 returnSize;\n        uint256 returnValue;\n        assembly (\"memory-safe\") {\n            success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)\n            returnSize := returndatasize()\n            returnValue := mload(0)\n        }\n        return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);\n    }\n}\n"},"@openzeppelin/contracts/token/ERC20/IERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev Interface of the ERC-20 standard as defined in the ERC.\n */\ninterface IERC20 {\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n\n    /**\n     * @dev Returns the value of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the value of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the\n     * allowance mechanism. `value` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 value) external returns (bool);\n}\n"},"@openzeppelin/contracts/utils/cryptography/Hashes.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (utils/cryptography/Hashes.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Library of standard hash functions.\n *\n * _Available since v5.1._\n */\nlibrary Hashes {\n    /**\n     * @dev Commutative Keccak256 hash of a sorted pair of bytes32. Frequently used when working with merkle proofs.\n     *\n     * NOTE: Equivalent to the `standardNodeHash` in our https://github.com/OpenZeppelin/merkle-tree[JavaScript library].\n     */\n    function commutativeKeccak256(bytes32 a, bytes32 b) internal pure returns (bytes32) {\n        return a < b ? efficientKeccak256(a, b) : efficientKeccak256(b, a);\n    }\n\n    /**\n     * @dev Implementation of keccak256(abi.encode(a, b)) that doesn't allocate or expand memory.\n     */\n    function efficientKeccak256(bytes32 a, bytes32 b) internal pure returns (bytes32 value) {\n        assembly (\"memory-safe\") {\n            mstore(0x00, a)\n            mstore(0x20, b)\n            value := keccak256(0x00, 0x40)\n        }\n    }\n}\n"},"@openzeppelin/contracts/utils/Context.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n"},"@openzeppelin/contracts/interfaces/IERC1363.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1363.sol)\n\npragma solidity >=0.6.2;\n\nimport {IERC20} from \"./IERC20.sol\";\nimport {IERC165} from \"./IERC165.sol\";\n\n/**\n * @title IERC1363\n * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].\n *\n * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract\n * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.\n */\ninterface IERC1363 is IERC20, IERC165 {\n    /*\n     * Note: the ERC-165 identifier for this interface is 0xb0202a11.\n     * 0xb0202a11 ===\n     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^\n     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^\n     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^\n     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^\n     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^\n     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))\n     */\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferAndCall(address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @param data Additional data with no specified format, sent in call to `to`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param from The address which you want to send tokens from.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferFromAndCall(address from, address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param from The address which you want to send tokens from.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @param data Additional data with no specified format, sent in call to `to`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.\n     * @param spender The address which will spend the funds.\n     * @param value The amount of tokens to be spent.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function approveAndCall(address spender, uint256 value) external returns (bool);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.\n     * @param spender The address which will spend the funds.\n     * @param value The amount of tokens to be spent.\n     * @param data Additional data with no specified format, sent in call to `spender`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);\n}\n"},"@openzeppelin/contracts/access/Ownable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\npragma solidity ^0.8.20;\n\nimport {Context} from \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n"},"@openzeppelin/contracts/utils/introspection/ERC165.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/ERC165.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC165} from \"./IERC165.sol\";\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC-165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /// @inheritdoc IERC165\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n"},"@openzeppelin/contracts/access/IAccessControl.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (access/IAccessControl.sol)\n\npragma solidity >=0.8.4;\n\n/**\n * @dev External interface of AccessControl declared to support ERC-165 detection.\n */\ninterface IAccessControl {\n    /**\n     * @dev The `account` is missing a role.\n     */\n    error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);\n\n    /**\n     * @dev The caller of a function is not the expected one.\n     *\n     * NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.\n     */\n    error AccessControlBadConfirmation();\n\n    /**\n     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`\n     *\n     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite\n     * {RoleAdminChanged} not being emitted to signal this.\n     */\n    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);\n\n    /**\n     * @dev Emitted when `account` is granted `role`.\n     *\n     * `sender` is the account that originated the contract call. This account bears the admin role (for the granted role).\n     * Expected in cases where the role was granted using the internal {AccessControl-_grantRole}.\n     */\n    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);\n\n    /**\n     * @dev Emitted when `account` is revoked `role`.\n     *\n     * `sender` is the account that originated the contract call:\n     *   - if using `revokeRole`, it is the admin role bearer\n     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)\n     */\n    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);\n\n    /**\n     * @dev Returns `true` if `account` has been granted `role`.\n     */\n    function hasRole(bytes32 role, address account) external view returns (bool);\n\n    /**\n     * @dev Returns the admin role that controls `role`. See {grantRole} and\n     * {revokeRole}.\n     *\n     * To change a role's admin, use {AccessControl-_setRoleAdmin}.\n     */\n    function getRoleAdmin(bytes32 role) external view returns (bytes32);\n\n    /**\n     * @dev Grants `role` to `account`.\n     *\n     * If `account` had not been already granted `role`, emits a {RoleGranted}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     */\n    function grantRole(bytes32 role, address account) external;\n\n    /**\n     * @dev Revokes `role` from `account`.\n     *\n     * If `account` had been granted `role`, emits a {RoleRevoked} event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     */\n    function revokeRole(bytes32 role, address account) external;\n\n    /**\n     * @dev Revokes `role` from the calling account.\n     *\n     * Roles are often managed via {grantRole} and {revokeRole}: this function's\n     * purpose is to provide a mechanism for accounts to lose their privileges\n     * if they are compromised (such as when a trusted device is misplaced).\n     *\n     * If the calling account had been granted `role`, emits a {RoleRevoked}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must be `callerConfirmation`.\n     */\n    function renounceRole(bytes32 role, address callerConfirmation) external;\n}\n"},"@openzeppelin/contracts/utils/introspection/IERC165.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/IERC165.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev Interface of the ERC-165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[ERC].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n"},"@openzeppelin/contracts/interfaces/IERC165.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC165.sol)\n\npragma solidity >=0.4.16;\n\nimport {IERC165} from \"../utils/introspection/IERC165.sol\";\n"},"@openzeppelin/contracts/interfaces/IERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC20.sol)\n\npragma solidity >=0.4.16;\n\nimport {IERC20} from \"../token/ERC20/IERC20.sol\";\n"}},"settings":{"optimizer":{"enabled":true,"runs":200},"outputSelection":{"*":{"":["ast"],"*":["abi","metadata","devdoc","userdoc","storageLayout","evm.legacyAssembly","evm.bytecode","evm.deployedBytecode","evm.methodIdentifiers","evm.gasEstimates","evm.assembly"]}},"remappings":[],"evmVersion":"cancun"}}