1221: move geist section; getting-started-with-power-..

Author: Nadia-JSch

docs/infrastructure-management/power-and-environmental-monitoring/getting-started-with-power-and-environmental-monitoring.mdx

@@ -16,12 +16,6 @@ Install and set up a [Remote Collector](https://www.device42.com/autodiscovery/)
 
 The process of discovering power-enabled PDUs is similar to [Device42 Network Autodiscovery](auto-discovery/network-auto-discovery.mdx). Begin by navigating to **Discovery > SNMP**. You can then enter an IP address range and a port if not using the default `161`.
 
-### Geist Power Unit Serial Number Discovery
-
-As of version 19.08, Device42 uses a different OID to discover power unit serial numbers for Geist PDUs, which now match the physical serial numbers on the devices.
-
-If a Geist power unit was discovered before this change and the [device matching level](/auto-discovery/unprocessed-device-records.mdx#device-matching-level) is not set to **Moderate**, a separate device record will be created. If matching is set to **Moderate** and the **Give precedence to hostname** option is not selected, the serial number will be updated but not the name of the device or power unit. 
-
 <ThemedImage
   alt="Add SNMP discovery job"
   sources={{
@@ -59,6 +53,12 @@ You'll see these options towards the bottom of the SNMP discovery job setup scre
 
 When sensors are discovered, they are created with Asset records in Device42. Navigate to **Resources > Assets > All Assets** to see a list of all assets. Filter the list by `Type="Sensor"` to see a list of all the PDU-attached sensors discovered.
 
+### Geist Power Unit Serial Number Discovery
+
+As of version 19.08, Device42 uses a different OID to discover power unit serial numbers for Geist PDUs, which now match the physical serial numbers on the devices.
+
+If a Geist power unit was discovered before this change and the [device matching level](/auto-discovery/unprocessed-device-records.mdx#device-matching-level) is not set to **Moderate**, a separate device record will be created. If matching is set to **Moderate** and the **Give precedence to hostname** option is not selected, the serial number will be updated but not the name of the device or power unit. 
+
 ## Capacity Considerations
 
 Monitoring is a fairly resource-intensive process, and as a result, each individual monitoring appliance is limited in the number of PDUs, infeeds, and outlets it can handle. When you set up each autodiscovery job, you will choose a polling interval. The primary resource limitation is the number of SNMP polls that can be done in the selected polling. So, if you select 5-minute polling intervals, you monitor 5x the number of PDUs in one monitoring appliance that you could if you selected 1-minute polling intervals.