Bump version

[v1v]

Given #1175

create the same PR but using the upstream rather than a fork

[github-actions]

3 related issues

• [gh-aw-upgrade] gh-aw upgrade available: v0.68.3 → v0.76.1 #1174 — it tracks the same version-upgrade objective and contains the concrete upgrade scope this issue is asking to reproduce from upstream.
• [bug-hunter] ready_to_make_pr fails on master-default repos without upstream tracking #493 — it documents upstream/base-ref resolution gaps in PR creation logic, which is relevant when recreating a change against upstream instead of a fork.
• [product-manager-impersonator] Auto-detect git remote in quick setup #562 — it captures prior work on remote selection/detection behavior, which can help when branch/remote assumptions differ between fork and upstream workflows.

Note

🔒 Integrity filter blocked 17 items

The following items were blocked because they don't meet the GitHub integrity level.

• #238 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #46 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #441 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #115 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #232 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #92 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #235 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #115 issue_read: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #485 issue_read: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #225 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #206 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #633 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #366 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #292 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #594 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• Update gh-aw-estc-pr-buildkite-detective lock file to gh-aw v0.76.1 #1175 pull_request_read: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• ... and 1 more item

To allow these resources, lower min-integrity in your GitHub frontmatter:

tools:
  github:
    min-integrity: approved  # merged | approved | unapproved | none

---

What is this? | From workflow: Trigger Duplicate Issue Detector

Give us feedback! React with 🚀 if perfect, 👍 if helpful, 👎 if not.

[github-actions]

tl;dr: #1179 is the right upstream PR to track for this issue, but I can’t independently verify “same as #1175” in this run because #1175 is integrity-restricted; require explicit parity evidence (patch/diffstat match) before closing #1178.

Recommendation

Use #1179 as the implementation vehicle for #1178, and gate closure on a concrete parity check against #1175 (for example: identical changed file list + equivalent patch content). If parity is confirmed, close #1178; if not, update #1179 to fully mirror the missing deltas.

Findings

• Issue request is explicit: recreate #1175 in upstream (#1178 body).
• #1179 is open/draft and currently reports 1 changed file:
  • .github/workflows/gh-aw-estc-pr-buildkite-detective.lock.yml
• Direct read of #1175 was blocked by integrity policy in this run, so exact parity cannot be proven here.
• Prior gh-aw bump PRs in this repo were typically broader in scope:
  • #351 changed_files: 50
  • #376 changed_files: 63
• There are multiple version pins in-repo, so partial bumps can drift:

# .github/workflows/smoke-test-install.yml:13
GH_AW_VERSION: "v0.48.1"

# Makefile:4
GH_AW_VERSION := v0.68.3

Verification

I ran repository validation commands to confirm current baseline behavior and triage guardrails:

$ make compile && make lint
...
⚠ Compiled 57 workflow(s): 0 error(s), 3 warning(s)
...
OK: all 37 catalog workflows are reachable from nav

Relevant command definitions:

• Makefile:170-183 (compile)
• Makefile:243-245 (lint)
• Makefile:260-285 (release, interactive/manual confirmation)

Detailed Action Plan

1. Confirm parity target for #1178 by obtaining the exact diff for #1175 (maintainer-side if needed due integrity restrictions in automation).
2. Compare #1179 against that target:
   • changed files list
   • patch content for .github/workflows/gh-aw-estc-pr-buildkite-detective.lock.yml
3. If parity is incomplete, update #1179 with missing changes and regenerate any required lock artifacts through the standard path:
   • make compile (Makefile:170-183)
   • make lint (Makefile:243-245)
4. If the change is intended to be lockfile-only, state that explicitly in #1179 and include parity proof (e.g., diffstat/patch comparison) to close #1178 confidently.
5. Optional consistency check for future bump PRs: align/justify version pin differences between Makefile:4 and .github/workflows/smoke-test-install.yml:13.

Related Items

Type	Link	Relevance
Issue	#1178	Current triage target
PR	#1179	Upstream draft intended to satisfy #1178
PR	#1175	Source PR to mirror (not readable in this run due integrity gate)
PR	#351	Prior gh-aw bump precedent (50 files changed)
PR	#376	Prior gh-aw bump precedent (63 files changed)
File	Makefile:4	Primary gh-aw compiler version pin
File	.github/workflows/smoke-test-install.yml:13	Separate smoke-test gh-aw pin
File	Makefile:170-183	Compile path used for regenerated lock workflows
File	Makefile:243-245	Lint path for validation

Note

🔒 Integrity filter blocked 31 items

The following items were blocked because they don't meet the GitHub integrity level.

• #640 search_pull_requests: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #643 search_pull_requests: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #240 search_pull_requests: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #537 search_pull_requests: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #504 search_pull_requests: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #697 search_pull_requests: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #46 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #441 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #115 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #232 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #1175 pull_request_read: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• Update gh-aw-estc-pr-buildkite-detective lock file to gh-aw v0.76.1 #1175 pull_request_read: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #420 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #206 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #92 search_issues: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• #675 search_pull_requests: has lower integrity than agent requires. The agent cannot read data with integrity below "approved".
• ... and 15 more items

To allow these resources, lower min-integrity in your GitHub frontmatter:

tools:
  github:
    min-integrity: approved  # merged | approved | unapproved | none

---

What is this? | From workflow: Trigger Issue Triage

Give us feedback! React with 🚀 if perfect, 👍 if helpful, 👎 if not.