usb: dwc3: qcom: Don't leave BCR asserted

commit ef8abc0 upstream.

Leaving the USB BCR asserted prevents the associated GDSC to turn on. This
blocks any subsequent attempts of probing the device, e.g. after a probe
deferral, with the following showing in the log:

[    1.332226] usb30_prim_gdsc status stuck at 'off'

Leave the BCR deasserted when exiting the driver to avoid this issue.

Cc: stable <stable@kernel.org>
Fixes: a4333c3 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250709132900.3408752-1-krishna.kurapati@oss.qualcomm.com
[ adapted to individual clock management API instead of bulk clock operations ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Author: Kriskura176767

drivers/usb/dwc3/dwc3-qcom.c

@@ -856,13 +856,13 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	ret = reset_control_deassert(qcom->resets);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to deassert resets, err=%d\n", ret);
-		goto reset_assert;
+		return ret;
 	}
 
 	ret = dwc3_qcom_clk_init(qcom, of_clk_get_parent_count(np));
 	if (ret) {
 		dev_err(dev, "failed to get clocks\n");
-		goto reset_assert;
+		return ret;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -966,8 +966,6 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 		clk_disable_unprepare(qcom->clks[i]);
 		clk_put(qcom->clks[i]);
 	}
-reset_assert:
-	reset_control_assert(qcom->resets);
 
 	return ret;
 }
@@ -997,7 +995,6 @@ static int dwc3_qcom_remove(struct platform_device *pdev)
 	qcom->num_clocks = 0;
 
 	dwc3_qcom_interconnect_exit(qcom);
-	reset_control_assert(qcom->resets);
 
 	pm_runtime_allow(dev);
 	pm_runtime_disable(dev);