Corrected the clock lookup table.

esden · esden · commit 3a8911627d45 · 2021-06-20T00:54:16.000-07:00
Due to copypasta we were using the hse table for hsi clocks.
diff --git a/examples/stm32/f1/lisa-m-1/usb_cdcacm/cdcacm.c b/examples/stm32/f1/lisa-m-1/usb_cdcacm/cdcacm.c
@@ -239,7 +239,7 @@ int main(void)
 
 	usbd_device *usbd_dev;
 
-	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_48MHZ]);
+	rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_48MHZ]);
 
 	rcc_periph_clock_enable(RCC_GPIOC);
 	rcc_periph_clock_enable(RCC_OTGFS);
diff --git a/examples/stm32/f1/lisa-m-1/usb_dfu/usbdfu.c b/examples/stm32/f1/lisa-m-1/usb_dfu/usbdfu.c
@@ -260,7 +260,7 @@ int main(void)
 		}
 	}
 
-	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_48MHZ]);
+	rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_48MHZ]);
 
 	rcc_periph_clock_enable(RCC_GPIOC);
 	rcc_periph_clock_enable(RCC_OTGFS);
diff --git a/examples/stm32/f1/obldc-strip/can/can.c b/examples/stm32/f1/obldc-strip/can/can.c
@@ -195,7 +195,7 @@ void usb_lp_can_rx0_isr(void)
 
 int main(void)
 {
-	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_64MHZ]);
+	rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_64MHZ]);
 	gpio_setup();
 	can_setup();
 	systick_setup();
diff --git a/examples/stm32/f1/obldc-strip/led/led.c b/examples/stm32/f1/obldc-strip/led/led.c
@@ -23,7 +23,7 @@
 static void clock_setup(void)
 {
 	/* Set STM32 to 64 MHz. */
-	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_64MHZ]);
+	rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_64MHZ]);
 
 	/* Enable alternate function peripheral clock. */
 	rcc_periph_clock_enable(RCC_AFIO);
diff --git a/examples/stm32/f1/obldc-strip/systick/systick.c b/examples/stm32/f1/obldc-strip/systick/systick.c
@@ -59,7 +59,7 @@ void sys_tick_handler(void)
 
 int main(void)
 {
-	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_64MHZ]);
+	rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_64MHZ]);
 	gpio_setup();
 
 	temp32 = 0;
diff --git a/examples/stm32/f1/obldc-strip/usart/usart.c b/examples/stm32/f1/obldc-strip/usart/usart.c
@@ -23,7 +23,7 @@
 
 static void clock_setup(void)
 {
-	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_64MHZ]);
+	rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_64MHZ]);
 
 	/* Enable clocks for GPIO port B (for GPIO_USART1_TX and LED) and USART1. */
 	rcc_periph_clock_enable(RCC_GPIOB);
diff --git a/examples/stm32/f1/other/usb_cdcacm/cdcacm.c b/examples/stm32/f1/other/usb_cdcacm/cdcacm.c
@@ -234,7 +234,7 @@ int main(void)
 {
 	usbd_device *usbd_dev;
 
-	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_48MHZ]);
+	rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_48MHZ]);
 
 	rcc_periph_clock_enable(RCC_GPIOA);
 	rcc_periph_clock_enable(RCC_AFIO);
diff --git a/examples/stm32/f1/other/usb_dfu/usbdfu.c b/examples/stm32/f1/other/usb_dfu/usbdfu.c
@@ -260,7 +260,7 @@ int main(void)
 		}
 	}
 
-	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_48MHZ]);
+	rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_48MHZ]);
 
 	rcc_periph_clock_enable(RCC_GPIOA);
 	rcc_periph_clock_enable(RCC_AFIO);
diff --git a/examples/stm32/f1/other/usb_hid/usbhid.c b/examples/stm32/f1/other/usb_hid/usbhid.c
@@ -276,7 +276,7 @@ static void hid_set_config(usbd_device *dev, uint16_t wValue)
 
 int main(void)
 {
-	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_48MHZ]);
+	rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_48MHZ]);
 
 	rcc_periph_clock_enable(RCC_GPIOA);
 	/*
diff --git a/examples/stm32/f1/stm32-h107/flash_rw_example/flash_rw_example.c b/examples/stm32/f1/stm32-h107/flash_rw_example/flash_rw_example.c
@@ -80,7 +80,7 @@ int main(void)
 static void init_system(void)
 {
 	/* setup SYSCLK to work with 64Mhz HSI */
-	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_64MHZ]);
+	rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_64MHZ]);
 	init_usart();
 }
 
diff --git a/examples/stm32/f1/stm32vl-discovery/adc-dac-printf/adc-dac-printf.c b/examples/stm32/f1/stm32vl-discovery/adc-dac-printf/adc-dac-printf.c
@@ -37,7 +37,7 @@ int _write(int file, char *ptr, int len);
 
 static void clock_setup(void)
 {
-	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_24MHZ]);
+	rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_24MHZ]);
 	/* Enable clocks for USART2 and DAC*/
 	rcc_periph_clock_enable(RCC_USART2);
 	rcc_periph_clock_enable(RCC_DAC);
diff --git a/examples/stm32/f1/waveshare-open103r/usbserial/usbserial.c b/examples/stm32/f1/waveshare-open103r/usbserial/usbserial.c
@@ -245,7 +245,7 @@ int main(void)
 {
   usbd_device *usbd_dev;
 
-  rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_48MHZ]);
+  rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_48MHZ]);
   rcc_periph_clock_enable(RCC_AFIO);
 
   AFIO_MAPR |= AFIO_MAPR_SWJ_CFG_JTAG_OFF_SW_ON;

Original file line number	Diff line number	Diff line change
`@@ -260,7 +260,7 @@ int main(void)`
`260`	`260`	`}`
`261`	`261`	`}`
`262`	`262`
`263`		`- rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_48MHZ]);`
	`263`	`+ rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_48MHZ]);`
`264`	`264`
`265`	`265`	`rcc_periph_clock_enable(RCC_GPIOC);`
`266`	`266`	`rcc_periph_clock_enable(RCC_OTGFS);`
Original file line number	Diff line number	Diff line change
`@@ -195,7 +195,7 @@ void usb_lp_can_rx0_isr(void)`
`195`	`195`
`196`	`196`	`int main(void)`
`197`	`197`	`{`
`198`		`- rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_64MHZ]);`
	`198`	`+ rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_64MHZ]);`
`199`	`199`	`gpio_setup();`
`200`	`200`	`can_setup();`
`201`	`201`	`systick_setup();`
Original file line number	Diff line number	Diff line change
`@@ -23,7 +23,7 @@`
`23`	`23`	`static void clock_setup(void)`
`24`	`24`	`{`
`25`	`25`	`/* Set STM32 to 64 MHz. */`
`26`		`- rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_64MHZ]);`
	`26`	`+ rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_64MHZ]);`
`27`	`27`
`28`	`28`	`/* Enable alternate function peripheral clock. */`
`29`	`29`	`rcc_periph_clock_enable(RCC_AFIO);`
Original file line number	Diff line number	Diff line change
`@@ -59,7 +59,7 @@ void sys_tick_handler(void)`
`59`	`59`
`60`	`60`	`int main(void)`
`61`	`61`	`{`
`62`		`- rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_64MHZ]);`
	`62`	`+ rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_64MHZ]);`
`63`	`63`	`gpio_setup();`
`64`	`64`
`65`	`65`	`temp32 = 0;`
Original file line number	Diff line number	Diff line change
`@@ -234,7 +234,7 @@ int main(void)`
`234`	`234`	`{`
`235`	`235`	`usbd_device *usbd_dev;`
`236`	`236`
`237`		`- rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_48MHZ]);`
	`237`	`+ rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_48MHZ]);`
`238`	`238`
`239`	`239`	`rcc_periph_clock_enable(RCC_GPIOA);`
`240`	`240`	`rcc_periph_clock_enable(RCC_AFIO);`
Original file line number	Diff line number	Diff line change
`@@ -276,7 +276,7 @@ static void hid_set_config(usbd_device *dev, uint16_t wValue)`
`276`	`276`
`277`	`277`	`int main(void)`
`278`	`278`	`{`
`279`		`- rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_48MHZ]);`
	`279`	`+ rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_48MHZ]);`
`280`	`280`
`281`	`281`	`rcc_periph_clock_enable(RCC_GPIOA);`
`282`	`282`	`/*`
Original file line number	Diff line number	Diff line change
`@@ -80,7 +80,7 @@ int main(void)`
`80`	`80`	`static void init_system(void)`
`81`	`81`	`{`
`82`	`82`	`/* setup SYSCLK to work with 64Mhz HSI */`
`83`		`- rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSI_64MHZ]);`
	`83`	`+ rcc_clock_setup_pll(&rcc_hsi_configs[RCC_CLOCK_HSI_64MHZ]);`
`84`	`84`	`init_usart();`
`85`	`85`	`}`
`86`	`86`