Skip to content

Equil5.3.md

Latest commit

 

History

History
36 lines (19 loc) · 1.05 KB

Equil5.3.md

File metadata and controls

36 lines (19 loc) · 1.05 KB

Equil

These instructions are for configuring the Equil insulin pump.

Pump capabilities with AAPS

§todo

Hardware and Software Requirements

  • Compatible Equil hardware

    Currently Equil 5.3 and 5.4 is supported

  • Version 3.3.0.0 or newer of AAPS

Select Equil pump

In Config Builder > Pump, switch to Equil 5.3.

הגדרות

settings.png

Activate patch

Navigate to the Equil Tab and press Pair Equil Patch Pump.

overview.png

activate1.png

activate2.png

activate3.png

If you set different password than default 0000 (recommended for your safety), do not forget to store this password on a safe place. This password is stored to the pump. Then this password is asked on every next pairing attempt until you do proper unpairing in AAPS. This makes the pump also unusable with original PDA until you unpair pump from AAPS.