usbtmc.py

"""

Python USBTMC driver

Copyright (c) 2012-2017 Alex Forencich

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.

"""

import usb.core
import usb.util
import struct
import time
import os
import re
import sys

# constants
USBTMC_bInterfaceClass    = 0xFE
USBTMC_bInterfaceSubClass = 3
USBTMC_bInterfaceProtocol = 0
USB488_bInterfaceProtocol = 1

USBTMC_MSGID_DEV_DEP_MSG_OUT            = 1
USBTMC_MSGID_REQUEST_DEV_DEP_MSG_IN     = 2
USBTMC_MSGID_DEV_DEP_MSG_IN             = 2
USBTMC_MSGID_VENDOR_SPECIFIC_OUT        = 126
USBTMC_MSGID_REQUEST_VENDOR_SPECIFIC_IN = 127
USBTMC_MSGID_VENDOR_SPECIFIC_IN         = 127
USB488_MSGID_TRIGGER                    = 128

USBTMC_STATUS_SUCCESS                  = 0x01
USBTMC_STATUS_PENDING                  = 0x02
USBTMC_STATUS_FAILED                   = 0x80
USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS = 0x81
USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS    = 0x82
USBTMC_STATUS_SPLIT_IN_PROGRESS        = 0x83
USB488_STATUS_INTERRUPT_IN_BUSY        = 0x20

USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT     = 1
USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS = 2
USBTMC_REQUEST_INITIATE_ABORT_BULK_IN      = 3
USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS  = 4
USBTMC_REQUEST_INITIATE_CLEAR              = 5
USBTMC_REQUEST_CHECK_CLEAR_STATUS          = 6
USBTMC_REQUEST_GET_CAPABILITIES            = 7
USBTMC_REQUEST_INDICATOR_PULSE             = 64

USB488_READ_STATUS_BYTE = 128
USB488_REN_CONTROL      = 160
USB488_GOTO_LOCAL       = 161
USB488_LOCAL_LOCKOUT    = 162

USBTMC_HEADER_SIZE = 12

RIGOL_QUIRK_PIDS = [0x04ce, 0x0588]


def parse_visa_resource_string(resource_string):
    # valid resource strings:
    # USB::1234::5678::INSTR
    # USB::1234::5678::SERIAL::INSTR
    # USB0::0x1234::0x5678::INSTR
    # USB0::0x1234::0x5678::SERIAL::INSTR
    m = re.match('^(?P<prefix>(?P<type>USB)\d*)(::(?P<arg1>[^\s:]+))'
        '(::(?P<arg2>[^\s:]+(\[.+\])?))(::(?P<arg3>[^\s:]+))?'
        '(::(?P<suffix>INSTR))$', resource_string, re.I)

    if m is not None:
        return dict(
            type=m.group('type').upper(),
            prefix=m.group('prefix'),
            arg1=m.group('arg1'),
            arg2=m.group('arg2'),
            arg3=m.group('arg3'),
            suffix=m.group('suffix')
        )


# Exceptions
class UsbtmcException(Exception):
    em = {0:  "No error"}

    def __init__(self, err=None, note=None):
        self.err = err
        self.note = note
        self.msg = ''

        if err is None:
            self.msg = note
        else:
            if type(err) is int:
                if err in self.em:
                    self.msg = "%d: %s" % (err, self.em[err])
                else:
                    self.msg = "%d: Unknown error" % err
            else:
                self.msg = err
            if note is not None:
                self.msg = "%s [%s]" % (self.msg, note)

    def __str__(self):
        return self.msg


def list_devices():
    "List all connected USBTMC devices"

    def is_usbtmc_device(dev):
        for cfg in dev:
            d = usb.util.find_descriptor(cfg, bInterfaceClass=USBTMC_bInterfaceClass,
                                         bInterfaceSubClass=USBTMC_bInterfaceSubClass)
            if d is not None:
                return True

            if dev.idVendor == 0x1334:
                # Advantest
                return True

            if dev.idVendor == 0x0957:
                # Agilent
                if dev.idProduct in [0x2818, 0x4218, 0x4418]:
                    # Agilent U27xx modular devices in firmware update mode
                    # 0x2818 for U2701A/U2702A (firmware update mode on power up)
                    # 0x4218 for U2722A (firmware update mode on power up)
                    # 0x4418 for U2723A (firmware update mode on power up)
                    return True

        return False

    return list(usb.core.find(find_all=True, custom_match=is_usbtmc_device))


def list_resources():
    "List resource strings for all connected USBTMC devices"

    res = []

    for dev in list_devices():
        idVendor = dev.idVendor
        idProduct = dev.idProduct

        # "fix" IDs for devices in firmware update mode
        if idVendor == 0x0957 and idProduct == 0x2818:
            # Agilent U2701A/U2702A firmware update mode
            idProduct = 0x2918

        if idVendor == 0x0957 and idProduct == 0x4218:
            # Agilent U2722A firmware update mode
            idProduct = 0x4118
        
        if idVendor == 0x0957 and idProduct == 0x4418:
            # Agilent U2723A firmware update mode
            idProduct = 0x4318

        # attempt to read serial number
        iSerial = None
        try:
            iSerial = dev.serial_number
        except:
            pass

        # append formatted resource string to list
        if iSerial is None:
            res.append("USB::%d::%d::INSTR" % (idVendor, idProduct))
        else:
            res.append("USB::%d::%d::%s::INSTR" % (idVendor, idProduct, iSerial))

    return res


def find_device(idVendor=None, idProduct=None, iSerial=None):
    "Find USBTMC instrument"

    devs = list_devices()

    if len(devs) == 0:
        return None

    for dev in devs:
        # match VID and PID
        found = dev.idVendor == idVendor and dev.idProduct == idProduct

        if idVendor == 0x0957 and idProduct == 0x2918:
            # Agilent U2701A/U2702A firmware update mode
            if dev.idVendor == idVendor and dev.idProduct == 0x2818:
                found = True
        
        if idVendor == 0x0957 and idProduct == 0x4118:
            # Agilent U2722A firmware update mode
            if dev.idVendor == idVendor and dev.idProduct == 0x4218:
                found = True

        if idVendor == 0x0957 and idProduct == 0x4318:
            # Agilent U2723A firmware update mode
            if dev.idVendor == idVendor and dev.idProduct == 0x4418:
                found = True

        if not found:
            continue

        if iSerial is None:
            return dev
        else:
            s = ''

            # try reading serial number
            try:
                s = dev.serial_number
            except:
                pass

            if iSerial == s:
                return dev

    return None


class Instrument(object):
    "USBTMC instrument interface client"
    def __init__(self, *args, **kwargs):
        "Create new USBTMC instrument object"
        self.idVendor = 0
        self.idProduct = 0
        self.iSerial = None
        self.device = None
        self.cfg = None
        self.iface = None
        self.term_char = None

        self.bcdUSBTMC = 0
        self.support_pulse = False
        self.support_talk_only = False
        self.support_listen_only = False
        self.support_term_char = False

        self.bcdUSB488 = 0
        self.support_USB4882 = False
        self.support_remote_local = False
        self.support_trigger = False
        self.support_scpi = False
        self.support_SR = False
        self.support_RL = False
        self.support_DT = False

        self.max_transfer_size = 1024*1024

        self.timeout = 5.0

        self.bulk_in_ep = None
        self.bulk_out_ep = None
        self.interrupt_in_ep = None

        self.last_btag = 0
        self.last_rstb_btag = 0

        self.connected = False
        self.reattach = []
        self.old_cfg = None

        # quirks
        self.advantest_quirk = False
        self.advantest_locked = False

        self.rigol_quirk = False
        self.rigol_quirk_ieee_block = False

        resource = None

        # process arguments
        if len(args) == 1:
            if type(args[0]) == str:
                resource = args[0]
            else:
                self.device = args[0]
        if len(args) >= 2:
            self.idVendor = args[0]
            self.idProduct = args[1]
        if len(args) >= 3:
            self.iSerial = args[2]

        for op in kwargs:
            val = kwargs[op]
            if op == 'idVendor':
                self.idVendor = val
            elif op == 'idProduct':
                self.idProduct = val
            elif op == 'iSerial':
                self.iSerial = val
            elif op == 'device':
                self.device = val
            elif op == 'dev':
                self.device = val
            elif op == 'term_char':
                self.term_char = val
            elif op == 'resource':
                resource = val

        if resource is not None:
            res = parse_visa_resource_string(resource)

            if res is None:
                raise UsbtmcException("Invalid resource string", 'init')

            if res['arg1'] is None and res['arg2'] is None:
                raise UsbtmcException("Invalid resource string", 'init')

            self.idVendor = int(res['arg1'], 0)
            self.idProduct = int(res['arg2'], 0)
            self.iSerial = res['arg3']

        # find device
        if self.device is None:
            if self.idVendor is None or self.idProduct is None:
                raise UsbtmcException("No device specified", 'init')
            else:
                self.device = find_device(self.idVendor, self.idProduct, self.iSerial)
                if self.device is None:
                    raise UsbtmcException("Device not found", 'init')

    def __del__(self):
        if self.connected:
            self.close()

    @property
    def timeout(self):
        return self._timeout

    @timeout.setter
    def timeout(self, val):
        self._timeout = val
        self._timeout_ms = int(val * 1000)

    def open(self):
        if self.connected:
            return

        # initialize device

        if self.device.idVendor == 0x0957 and self.device.idProduct in [0x2818, 0x4218, 0x4418]:
            # Agilent U27xx modular devices
            # U2701A/U2702A, U2722A/U2723A
            # These devices require a short initialization sequence, presumably
            # to take them out of 'firmware update' mode after confirming
            # that the firmware version is correct. This is required once
            # on every power-on before the device can be used.
            # Note that the device will reset and the product ID will change.
            # U2701A/U2702A boot 0x2818, usbtmc 0x2918
            # U2722A boot 0x4218, usbtmc 0x4118
            # U2723A boot 0x4418, usbtmc 0x4318
 
            serial = self.device.serial_number

            new_id = 0

            if self.device.idProduct == 0x2818:
                # U2701A/U2702A
                new_id = 0x2918
                self.device.ctrl_transfer(bmRequestType=0xC0, bRequest=0x0C, wValue=0x0000, wIndex=0x047E, data_or_wLength=0x0001)
                self.device.ctrl_transfer(bmRequestType=0xC0, bRequest=0x0C, wValue=0x0000, wIndex=0x047D, data_or_wLength=0x0006)
                self.device.ctrl_transfer(bmRequestType=0xC0, bRequest=0x0C, wValue=0x0000, wIndex=0x0484, data_or_wLength=0x0005)
                self.device.ctrl_transfer(bmRequestType=0xC0, bRequest=0x0C, wValue=0x0000, wIndex=0x0472, data_or_wLength=0x000C)
                self.device.ctrl_transfer(bmRequestType=0xC0, bRequest=0x0C, wValue=0x0000, wIndex=0x047A, data_or_wLength=0x0001)
                self.device.ctrl_transfer(bmRequestType=0x40, bRequest=0x0C, wValue=0x0000, wIndex=0x0475, data_or_wLength=b'\x00\x00\x01\x01\x00\x00\x08\x01')

            if self.device.idProduct in [0x4218, 0x4418]:
                # U2722A/U2723A
                if self.device.idProduct == 0x4218:
                    # U2722A
                    new_id = 0x4118
                elif self.device.idProduct == 0x4418:
                    # U2723A
                    new_id = 0x4318
                self.device.ctrl_transfer(bmRequestType=0xC0, bRequest=0x0C, wValue=0x0000, wIndex=0x047E, data_or_wLength=0x0001)
                self.device.ctrl_transfer(bmRequestType=0xC0, bRequest=0x0C, wValue=0x0000, wIndex=0x047D, data_or_wLength=0x0006)
                self.device.ctrl_transfer(bmRequestType=0xC0, bRequest=0x0C, wValue=0x0000, wIndex=0x0487, data_or_wLength=0x0005)
                self.device.ctrl_transfer(bmRequestType=0xC0, bRequest=0x0C, wValue=0x0000, wIndex=0x0472, data_or_wLength=0x000C)
                self.device.ctrl_transfer(bmRequestType=0xC0, bRequest=0x0C, wValue=0x0000, wIndex=0x047A, data_or_wLength=0x0001)
                self.device.ctrl_transfer(bmRequestType=0x40, bRequest=0x0C, wValue=0x0000, wIndex=0x0475, data_or_wLength=b'\x00\x00\x01\x01\x00\x00\x08\x01')

            usb.util.dispose_resources(self.device)
            self.device = None

            for i in range(40):
                self.device = find_device(0x0957, new_id, serial)
                if self.device is not None:
                    break
                time.sleep(0.5)

            if self.device is None:
                print("Agilent U27xx modular device initialization failed")

        # find first USBTMC interface
        for cfg in self.device:
            for iface in cfg:
                if (iface.bInterfaceClass == USBTMC_bInterfaceClass and
                    iface.bInterfaceSubClass == USBTMC_bInterfaceSubClass):
                    # USBTMC device
                    self.cfg = cfg
                    self.iface = iface
                    break
                elif (self.device.idVendor == 0x1334):
                    # Advantest
                    self.cfg = cfg
                    self.iface = iface
                    break
                else:
                    continue
            break

        if self.iface is None:
            raise UsbtmcException("Not a USBTMC device", 'init')

        try:
            self.old_cfg = self.device.get_active_configuration()
        except usb.core.USBError:
            # ignore exception if configuration is not set
            pass

        if self.old_cfg is not None and self.old_cfg.bConfigurationValue == self.cfg.bConfigurationValue:
            # already set to correct configuration

            # release kernel driver on USBTMC interface
            self._release_kernel_driver(self.iface.bInterfaceNumber)
        else:
            # wrong configuration or configuration not set

            # release all kernel drivers
            if self.old_cfg is not None:
                for iface in self.old_cfg:
                    self._release_kernel_driver(iface.bInterfaceNumber)

            # set proper configuration
            self.device.set_configuration(self.cfg)

        # claim interface
        usb.util.claim_interface(self.device, self.iface)

        # don't need to set altsetting - USBTMC devices have 1 altsetting as per the spec

        # find endpoints
        for ep in self.iface:
            ep_dir = usb.util.endpoint_direction(ep.bEndpointAddress)
            ep_type = usb.util.endpoint_type(ep.bmAttributes)

            if (ep_type == usb.util.ENDPOINT_TYPE_BULK):
                if (ep_dir == usb.util.ENDPOINT_IN):
                    self.bulk_in_ep = ep
                elif (ep_dir == usb.util.ENDPOINT_OUT):
                    self.bulk_out_ep = ep
            elif (ep_type == usb.util.ENDPOINT_TYPE_INTR):
                if (ep_dir == usb.util.ENDPOINT_IN):
                    self.interrupt_in_ep = ep

        if self.bulk_in_ep is None or self.bulk_out_ep is None:
            raise UsbtmcException("Invalid endpoint configuration", 'init')

        # set quirk flags if necessary
        if self.device.idVendor == 0x1334:
            # Advantest/ADCMT devices have a very odd USBTMC implementation
            # which requires max 63 byte reads and never signals EOI on read
            self.max_transfer_size = 63
            self.advantest_quirk = True

        if self.device.idVendor == 0x1ab1 and self.device.idProduct in RIGOL_QUIRK_PIDS:
            self.rigol_quirk = True

            if self.device.idProduct == 0x04ce:
                self.rigol_quirk_ieee_block = True

        self.connected = True

        # DS1000Z (and DS2000, from eevblog forum) fails with INITIATE_CLEAR
        if not self.rigol_quirk:
            self.clear()

        self.get_capabilities()

    def close(self):
        if not self.connected:
            return

        usb.util.dispose_resources(self.device)

        try:
            # reset configuration
            if self.cfg.bConfigurationValue != self.old_cfg.bConfigurationValue:
                self.device.set_configuration(self.old_cfg)

            # try to reattach kernel driver
            for iface in self.reattach:
                try:
                    self.device.attach_kernel_driver(iface)
                except:
                    pass
        except:
            pass

        self.reattach = []

        self.connected = False

    def is_usb488(self):
        return self.iface.bInterfaceProtocol == USB488_bInterfaceProtocol

    def get_capabilities(self):

        if not self.connected:
            self.open()

        b = self.device.ctrl_transfer(
              usb.util.build_request_type(usb.util.CTRL_IN, usb.util.CTRL_TYPE_CLASS, usb.util.CTRL_RECIPIENT_INTERFACE),
              USBTMC_REQUEST_GET_CAPABILITIES,
              0x0000,
              self.iface.index,
              0x0018,
              timeout=self._timeout_ms)
        if (b[0] == USBTMC_STATUS_SUCCESS):
            self.bcdUSBTMC = (b[3] << 8) + b[2]
            self.support_pulse = b[4] & 4 != 0
            self.support_talk_only = b[4] & 2 != 0
            self.support_listen_only = b[4] & 1 != 0
            self.support_term_char = b[5] & 1 != 0

            if self.is_usb488():
                self.bcdUSB488 = (b[13] << 8) + b[12]
                self.support_USB4882 = b[4] & 4 != 0
                self.support_remote_local = b[4] & 2 != 0
                self.support_trigger = b[4] & 1 != 0
                self.support_scpi = b[4] & 8 != 0
                self.support_SR = b[4] & 4 != 0
                self.support_RL = b[4] & 2 != 0
                self.support_DT = b[4] & 1 != 0
        else:
            raise UsbtmcException("Get capabilities failed", 'get_capabilities')

    def pulse(self):
        """
        Send a pulse indicator request, this should blink a light
        for 500-1000ms and then turn off again. (Only if supported)
        """
        if not self.connected:
            self.open()

        if self.support_pulse:
            b = self.device.ctrl_transfer(
                  usb.util.build_request_type(usb.util.CTRL_IN, usb.util.CTRL_TYPE_CLASS, usb.util.CTRL_RECIPIENT_INTERFACE),
                  USBTMC_REQUEST_INDICATOR_PULSE,
                  0x0000,
                  self.iface.index,
                  0x0001,
                  timeout=self._timeout_ms)
            if (b[0] != USBTMC_STATUS_SUCCESS):
                raise UsbtmcException("Pulse failed", 'pulse')

    # message header management
    def pack_bulk_out_header(self, msgid):
        self.last_btag = btag = (self.last_btag % 255) + 1
        return struct.pack('BBBx', msgid, btag, ~btag & 0xFF)

    def pack_dev_dep_msg_out_header(self, transfer_size, eom = True):
        hdr = self.pack_bulk_out_header(USBTMC_MSGID_DEV_DEP_MSG_OUT)
        return hdr+struct.pack("<LBxxx", transfer_size, eom)

    def pack_dev_dep_msg_in_header(self, transfer_size, term_char = None):
        hdr = self.pack_bulk_out_header(USBTMC_MSGID_DEV_DEP_MSG_IN)
        transfer_attributes = 0
        if term_char is None:
            term_char = 0
        else:
            transfer_attributes = 2
            term_char = self.term_char
        return hdr+struct.pack("<LBBxx", transfer_size, transfer_attributes, term_char)

    def pack_vendor_specific_out_header(self, transfer_size):
        hdr = self.pack_bulk_out_header(USBTMC_MSGID_VENDOR_SPECIFIC_OUT)
        return hdr+struct.pack("<Lxxxx", transfer_size)

    def pack_vendor_specific_in_header(self, transfer_size):
        hdr = self.pack_bulk_out_header(USBTMC_MSGID_VENDOR_SPECIFIC_IN)
        return hdr+struct.pack("<Lxxxx", transfer_size)

    def pack_usb488_trigger(self):
        hdr = self.pack_bulk_out_header(USB488_MSGID_TRIGGER)
        return hdr+b'\x00'*8

    def unpack_bulk_in_header(self, data):
        msgid, btag, btaginverse = struct.unpack_from('BBBx', data)
        return (msgid, btag, btaginverse)

    def unpack_dev_dep_resp_header(self, data):
        msgid, btag, btaginverse = self.unpack_bulk_in_header(data)
        transfer_size, transfer_attributes = struct.unpack_from('<LBxxx', data, 4)
        data = data[USBTMC_HEADER_SIZE:transfer_size+USBTMC_HEADER_SIZE]
        return (msgid, btag, btaginverse, transfer_size, transfer_attributes, data)

    def write_raw(self, data):
        "Write binary data to instrument"

        if not self.connected:
            self.open()

        eom = False

        num = len(data)

        offset = 0

        try:
            while num > 0:
                if num <= self.max_transfer_size:
                    eom = True

                block = data[offset:offset+self.max_transfer_size]
                size = len(block)

                req = self.pack_dev_dep_msg_out_header(size, eom) + block + b'\0'*((4 - (size % 4)) % 4)
                self.bulk_out_ep.write(req, timeout=self._timeout_ms)

                offset += size
                num -= size
        except usb.core.USBError:
            exc = sys.exc_info()[1]
            if exc.errno == 110:
                # timeout, abort transfer
                self._abort_bulk_out()
            raise

    def read_raw(self, num=-1):
        "Read binary data from instrument"

        if not self.connected:
            self.open()

        read_len = self.max_transfer_size
        if 0 < num < read_len:
            read_len = num

        eom = False

        term_char = None

        if self.term_char is not None:
            term_char = self.term_char

        read_data = b''

        try:
            while not eom:
                if not self.rigol_quirk or read_data == b'':

                    # if the rigol sees this again, it will restart the transfer
                    # so only send it the first time

                    req = self.pack_dev_dep_msg_in_header(read_len, term_char)
                    self.bulk_out_ep.write(req, timeout=self._timeout_ms)

                resp = self.bulk_in_ep.read(read_len+USBTMC_HEADER_SIZE+3, timeout=self._timeout_ms)

                if sys.version_info >= (3, 2):
                    resp = resp.tobytes()
                else:
                    resp = resp.tostring()

                if self.rigol_quirk and read_data:
                    pass # do nothing, the packet has no header if it isn't the first
                else:
                    msgid, btag, btaginverse, transfer_size, transfer_attributes, data = self.unpack_dev_dep_resp_header(resp) 


                if self.rigol_quirk:
                    # rigol devices only send the header in the first packet, and they lie about whether the transaction is complete
                    if read_data:
                        read_data += resp
                    else:
                        if self.rigol_quirk_ieee_block and data.startswith(b"#"):

                            # ieee block incoming, the transfer_size usbtmc header is lying about the transaction size
                            l = int(chr(data[1]))
                            n = int(data[2:l+2])

                            transfer_size = n + (l+2)  # account for ieee header

                        read_data += data

                    if len(read_data) >= transfer_size:
                        read_data = read_data[:transfer_size]  # as per usbtmc spec section 3.2 note 2
                        eom = True
                    else:
                        eom = False
                else:
                    eom = transfer_attributes & 1
                    read_data += data

                # Advantest devices never signal EOI and may only send one read packet
                if self.advantest_quirk:
                    break

                if num > 0:
                    num = num - len(data)
                    if num <= 0:
                        break
                    if num < read_len:
                        read_len = num
        except usb.core.USBError:
            exc = sys.exc_info()[1]
            if exc.errno == 110:
                # timeout, abort transfer
                self._abort_bulk_in()
            raise

        return read_data

    def ask_raw(self, data, num=-1):
        "Write then read binary data"
        # Advantest/ADCMT hardware won't respond to a command unless it's in Local Lockout mode
        was_locked = self.advantest_locked
        try:
            if self.advantest_quirk and not was_locked:
                self.lock()
            self.write_raw(data)
            return self.read_raw(num)
        finally:
            if self.advantest_quirk and not was_locked:
                self.unlock()

    def write(self, message, encoding='utf-8'):
        "Write string to instrument"
        if type(message) is tuple or type(message) is list:
            # recursive call for a list of commands
            for message_i in message:
                self.write(message_i, encoding)
            return

        self.write_raw(str(message).encode(encoding))

    def read(self, num=-1, encoding='utf-8'):
        "Read string from instrument"
        return self.read_raw(num).decode(encoding).rstrip('\r\n')

    def ask(self, message, num=-1, encoding='utf-8'):
        "Write then read string"
        if type(message) is tuple or type(message) is list:
            # recursive call for a list of commands
            val = list()
            for message_i in message:
                val.append(self.ask(message_i, num, encoding))
            return val

        # Advantest/ADCMT hardware won't respond to a command unless it's in Local Lockout mode
        was_locked = self.advantest_locked
        try:
            if self.advantest_quirk and not was_locked:
                self.lock()
            self.write(message, encoding)
            return self.read(num, encoding)
        finally:
            if self.advantest_quirk and not was_locked:
                self.unlock()

    def read_stb(self):
        "Read status byte"

        if not self.connected:
            self.open()

        if self.is_usb488():
            rstb_btag = (self.last_rstb_btag % 128) + 1
            if rstb_btag < 2:
                rstb_btag = 2
            self.last_rstb_btag = rstb_btag

            b = self.device.ctrl_transfer(
                bmRequestType=usb.util.build_request_type(usb.util.CTRL_IN, usb.util.CTRL_TYPE_CLASS, usb.util.CTRL_RECIPIENT_INTERFACE),
                bRequest=USB488_READ_STATUS_BYTE,
                wValue=rstb_btag,
                wIndex=self.iface.index,
                data_or_wLength=0x0003,
                timeout=self._timeout_ms
            )
            if (b[0] == USBTMC_STATUS_SUCCESS):
                # check btag
                if rstb_btag != b[1]:
                    raise UsbtmcException("Read status byte btag mismatch", 'read_stb')
                if self.interrupt_in_ep is None:
                    # no interrupt channel, value is here
                    return b[2]
                else:
                    # read response from interrupt channel
                    resp = self.interrupt_in_ep.read(2, timeout=self._timeout_ms)
                    if resp[0] != rstb_btag + 128:
                        raise UsbtmcException("Read status byte btag mismatch", 'read_stb')
                    else:
                        return resp[1]
            else:
                raise UsbtmcException("Read status failed", 'read_stb')
        else:
            return int(self.ask("*STB?"))

    def trigger(self):
        "Send trigger command"

        if not self.connected:
            self.open()

        if self.support_trigger:
            data = self.pack_usb488_trigger()
            print(repr(data))
            self.bulk_out_ep.write(data, timeout=self._timeout_ms)
        else:
            self.write("*TRG")

    def clear(self):
        "Send clear command"

        if not self.connected:
            self.open()

        # Send INITIATE_CLEAR
        b = self.device.ctrl_transfer(
            bmRequestType=usb.util.build_request_type(usb.util.CTRL_IN, usb.util.CTRL_TYPE_CLASS, usb.util.CTRL_RECIPIENT_INTERFACE),
            bRequest=USBTMC_REQUEST_INITIATE_CLEAR,
            wValue=0x0000,
            wIndex=self.iface.index,
            data_or_wLength=0x0001,
            timeout=self._timeout_ms
        )
        if (b[0] == USBTMC_STATUS_SUCCESS):
            # Initiate clear succeeded, wait for completion
            while True:
                # Check status
                b = self.device.ctrl_transfer(
                    bmRequestType=usb.util.build_request_type(usb.util.CTRL_IN, usb.util.CTRL_TYPE_CLASS, usb.util.CTRL_RECIPIENT_INTERFACE),
                    bRequest=USBTMC_REQUEST_CHECK_CLEAR_STATUS,
                    wValue=0x0000,
                    wIndex=self.iface.index,
                    data_or_wLength=0x0002,
                    timeout=self._timeout_ms
                )
                time.sleep(0.1)
                if (b[0] != USBTMC_STATUS_PENDING):
                    break
            # Clear halt condition
            self.bulk_out_ep.clear_halt()
        else:
            raise UsbtmcException("Clear failed", 'clear')

    def _abort_bulk_out(self, btag=None):
        "Abort bulk out"

        if not self.connected:
            return

        if btag is None:
            btag = self.last_btag

        # Send INITIATE_ABORT_BULK_OUT
        b = self.device.ctrl_transfer(
            bmRequestType=usb.util.build_request_type(usb.util.CTRL_IN, usb.util.CTRL_TYPE_CLASS, usb.util.CTRL_RECIPIENT_ENDPOINT),
            bRequest=USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT,
            wValue=btag,
            wIndex=self.bulk_out_ep.bEndpointAddress,
            data_or_wLength=0x0002,
            timeout=self._timeout_ms
        )
        if (b[0] == USBTMC_STATUS_SUCCESS):
            # Initiate abort bulk out succeeded, wait for completion
            while True:
                # Check status
                b = self.device.ctrl_transfer(
                    bmRequestType=usb.util.build_request_type(usb.util.CTRL_IN, usb.util.CTRL_TYPE_CLASS, usb.util.CTRL_RECIPIENT_ENDPOINT),
                    bRequest=USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS,
                    wValue=0x0000,
                    wIndex=self.bulk_out_ep.bEndpointAddress,
                    data_or_wLength=0x0008,
                    timeout=self._timeout_ms
                )
                time.sleep(0.1)
                if (b[0] != USBTMC_STATUS_PENDING):
                    break
        else:
            # no transfer in progress; nothing to do
            pass

    def _abort_bulk_in(self, btag=None):
        "Abort bulk in"

        if not self.connected:
            return

        if btag is None:
            btag = self.last_btag

        # Send INITIATE_ABORT_BULK_IN
        b = self.device.ctrl_transfer(
            bmRequestType=usb.util.build_request_type(usb.util.CTRL_IN, usb.util.CTRL_TYPE_CLASS, usb.util.CTRL_RECIPIENT_ENDPOINT),
            bRequest=USBTMC_REQUEST_INITIATE_ABORT_BULK_IN,
            wValue=btag,
            wIndex=self.bulk_in_ep.bEndpointAddress,
            data_or_wLength=0x0002,
            timeout=self._timeout_ms
        )
        if (b[0] == USBTMC_STATUS_SUCCESS):
            # Initiate abort bulk in succeeded, wait for completion
            while True:
                # Check status
                b = self.device.ctrl_transfer(
                    bmRequestType=usb.util.build_request_type(usb.util.CTRL_IN, usb.util.CTRL_TYPE_CLASS, usb.util.CTRL_RECIPIENT_ENDPOINT),
                    bRequest=USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS,
                    wValue=0x0000,
                    wIndex=self.bulk_in_ep.bEndpointAddress,
                    data_or_wLength=0x0008,
                    timeout=self._timeout_ms
                )
                time.sleep(0.1)
                if (b[0] != USBTMC_STATUS_PENDING):
                    break
        else:
            # no transfer in progress; nothing to do
            pass

    def remote(self):
        "Send remote command"
        raise NotImplementedError()

    def local(self):
        "Send local command"
        raise NotImplementedError()

    def lock(self):
        "Send lock command"

        if not self.connected:
            self.open()

        if self.advantest_quirk:
            # This Advantest/ADCMT vendor-specific control command enables remote control and must be sent before any commands are exchanged
            # (otherwise READ commands will only retrieve the latest measurement)
            self.advantest_locked = True
            self.device.ctrl_transfer(bmRequestType=0xA1, bRequest=0xA0, wValue=0x0001, wIndex=0x0000, data_or_wLength=1)
        else:
            raise NotImplementedError()

    def unlock(self):
        "Send unlock command"

        if not self.connected:
            self.open()

        if self.advantest_quirk:
            # This Advantest/ADCMT vendor-specific control command enables remote control and must be sent before any commands are exchanged
            # (otherwise READ commands will only retrieve the latest measurement)
            self.advantest_locked = False
            self.device.ctrl_transfer(bmRequestType=0xA1, bRequest=0xA0, wValue=0x0000, wIndex=0x0000, data_or_wLength=1)
        else:
            raise NotImplementedError()

    def advantest_read_myid(self):

        if not self.connected:
            self.open()

        "Read MyID value from Advantest and ADCMT devices"
        if self.advantest_quirk:
            # This Advantest/ADCMT vendor-specific control command reads the "MyID" identifier
            try:
                return int(self.device.ctrl_transfer(bmRequestType=0xC1, bRequest=0xF5, wValue=0x0000, wIndex=0x0000, data_or_wLength=1)[0])
            except:
                return None
        else:
            raise NotImplementedError()

    def _release_kernel_driver(self, interface_number):
        if os.name == 'posix':
            if self.device.is_kernel_driver_active(interface_number):
                self.reattach.append(interface_number)
                try:
                    self.device.detach_kernel_driver(interface_number)
                except usb.core.USBError as e:
                    sys.exit(
                        "Could not detach kernel driver from interface({0}): {1}".format(interface_number,
                                                                                         str(e)))