Update SDHI_SMS_README.txt

Author: sumghai

GameData/SDHI/Service Module System/SDHI_SMS_README.txt

@@ -25,8 +25,6 @@ Disclaimer:	This parts pack is for an alpha game - Use at own risk.
 
  - Deadly Reentry Continued (Starwaster) - if installed, the SDHI Heat Shield will protect the Mk1-2 Pod from the heat and stresses of atmospheric reentry; most other Service Module components will also consistently be burned up when deorbited
 
- - Ferram Aerospace Research (ferram4) - if installed, the Boost Protective Cover and Service Module Fairings will properly shield other components from aerodynamic stresses experienced during launch, reducing drag and making your rockets more efficient at getting into orbit
-
  - Ship Manifest and Connected Living Spaces API (Papa_Joe) - if installed, crew transfer will be realistically limited to through the parachute-equipped docking ports
 
  - TAC Life Support (TaranisElsu) - if installed, will add a total of Kerbin eight day's worth of life support provisions to the Mk1-2 Pod and Service Module, plus Carbon Extractors and Water Filters 
@@ -70,10 +68,11 @@ If you have other SDHI part packs you wish to keep, just remove the Service Modu
 WARNING: This is a craft and save-breaking update; it is recommended you abort / recover existing SDHI craft before installing this update
 
 Changes / Fixes:
- - Compatibility Patch for KSP 1.1
+ - Compatibility Patch for KSP 1.0.5
  - A dedicated Launch Escape System (LES) is now included in the parts pack
     - The LES runs on Solid Fuel, and is capable of lifting a Mk 1-2 Pod, heat shield and Pod Boost Protective Cover up to 2.0 km in altitude, making pad aborts viable compared to the stock LES
     - The LES also includes built-in RCS thrusters that are powered by its own independent Solid Fuel reserve, allowing mid-abort course corrections
+ - Added support for tg626's Docking Target mod, which adds a cosmetic docking alignment target mesh to all Clamp-O-Tron docking ports
  - Dropped support for HotRockets! plugin
     - The plugin is currently not compatible/updated for KSP 1.0.5
     - The fairingless LV-909 engine will now only have stock engine FX
@@ -83,18 +82,19 @@ Changes / Fixes:
  - Mk1-2 Pod Aeroshroud jettison motor thrustTransforms relocated to the sides of the shroud
     - The thrustTransforms were previously located under the skirt of the shroud itself, which would overheat nearby parts such as the Service Module and Heat Shield
     - Shroud texture modified to include jettison motor nozzles and warning label decals
+ - Mk 1-2 Pod Umbilical Port no longer toggleable outside VAB/SPH editor scene
+    - This long-standing bug was fixed with the introduction of scene-specific animation toggling in KSP 1.0.5 (courtesy of SQUAD developer NathanKell)
  - Rebalanced part costs to be in line with stock parts (courtesy Kerbas-ad-astra)
     - Avionics Ring now has higher entry/per part cost, lower mass and adjusted CoM offset
     - Service Module now has higher entry/per part cost, lower mass and adjusted CoM offset
     - Service Module Adapter now has lower entry/per part cost, lower mass and lower breaking force/torque
- - The Service Module and Avionics Rings now have built-in support for MechJeb and RemoteTech
+ - SDHI Heat Shield characteristics updated for KSP 1.0.5's thermal model
  - Side fairings and Mk1-2 Pod Aeroshroud colliders reworked using convex rather than concave meshes
  - Side fairings now decouple from the Service Module itself rather than the Service Module Adapter
- - The Service Module and Avionic Ring decoupler will wait until the umbilical has fully extended before releasing the Mk1-2 Pod
+ - The Service Module and Avionics Ring now have built-in support for MechJeb and RemoteTech
+ - The Service Module and Avionics Ring decoupler will wait until the umbilical has fully extended before releasing the Mk1-2 Pod
 
 Bugs/Known Issues
- - Mk 1-2 Pod Umbilical Port is now also toggleable outside of the VAB/SPH editor scenes
-    - This is due to a limitation with the current stock KSP ModuleAnimateGeneric behaviour, but is not game-breaking.
  - Part testing contracts are generated in Career Mode
     - This not intended behaviour, since the SDHI SMS is intended to be tested as a complete assembled stack rather than in piecemeal
     - A future update might include a proper contract for testing the SDHI SMS