Merge branches 'acpi-resource', 'acpi-pm' and 'acpi-docs' into linux-next

* acpi-resource:
  ACPI: resource: fix a typo for MECHREVO in irq1_edge_low_force_override[]

* acpi-pm:
  pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unset
  pinctrl: amd: Fix use of undeclared identifier 'pinctrl_amd_s2idle_dev_ops'
  pinctrl: amd: Add an LPS0 check() callback
  ACPI: Add missing prototype for non CONFIG_SUSPEND/CONFIG_X86 case

* acpi-docs:
  Documentation: ACPI: Use all-string data node references

Author: rafaeljw

Documentation/firmware-guide/acpi/dsd/data-node-references.rst

@@ -12,11 +12,14 @@ ACPI in general allows referring to device objects in the tree only.
 Hierarchical data extension nodes may not be referred to directly, hence this
 document defines a scheme to implement such references.
 
-A reference consist of the device object name followed by one or more
-hierarchical data extension [dsd-guide] keys. Specifically, the hierarchical
-data extension node which is referred to by the key shall lie directly under
-the parent object i.e. either the device object or another hierarchical data
-extension node.
+A reference to a _DSD hierarchical data node is a string consisting of a
+device object reference followed by a dot (".") and a relative path to a data
+node object. Do not use non-string references as this will produce a copy of
+the hierarchical data node, not a reference!
+
+The hierarchical data extension node which is referred to shall be located
+directly under its parent object i.e. either the device object or another
+hierarchical data extension node [dsd-guide].
 
 The keys in the hierarchical data nodes shall consist of the name of the node,
 "@" character and the number of the node in hexadecimal notation (without pre-
@@ -33,11 +36,9 @@ extension key.
 Example
 =======
 
-In the ASL snippet below, the "reference" _DSD property contains a
-device object reference to DEV0 and under that device object, a
-hierarchical data extension key "node@1" referring to the NOD1 object
-and lastly, a hierarchical data extension key "anothernode" referring to
-the ANOD object which is also the final target node of the reference.
+In the ASL snippet below, the "reference" _DSD property contains a string
+reference to a hierarchical data extension node ANOD under DEV0 under the parent
+of DEV1. ANOD is also the final target node of the reference.
 ::
 
 	Device (DEV0)
@@ -76,10 +77,7 @@ the ANOD object which is also the final target node of the reference.
 	    Name (_DSD, Package () {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
-		    Package () {
-			"reference", Package () {
-			    ^DEV0, "node@1", "anothernode"
-			}
+		    Package () { "reference", "^DEV0.ANOD" }
 		    },
 		}
 	    })

Documentation/firmware-guide/acpi/dsd/graph.rst

@@ -66,12 +66,9 @@ of that port shall be zero. Similarly, if a port may only have a single
 endpoint, the number of that endpoint shall be zero.
 
 The endpoint reference uses property extension with "remote-endpoint" property
-name followed by a reference in the same package. Such references consist of
-the remote device reference, the first package entry of the port data extension
-reference under the device and finally the first package entry of the endpoint
-data extension reference under the port. Individual references thus appear as::
+name followed by a string reference in the same package. [data-node-ref]::
 
-    Package() { device, "port@X", "endpoint@Y" }
+    "device.datanode"
 
 In the above example, "X" is the number of the port and "Y" is the number of
 the endpoint.
@@ -109,7 +106,7 @@ A simple example of this is show below::
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
 		    Package () { "reg", 0 },
-		    Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, "port@4", "endpoint@0" } },
+		    Package () { "remote-endpoint", "\\_SB.PCI0.ISP.EP40" },
 		}
 	    })
 	}
@@ -141,7 +138,7 @@ A simple example of this is show below::
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
 		    Package () { "reg", 0 },
-		    Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, "port@0", "endpoint@0" } },
+		    Package () { "remote-endpoint", "\\_SB.PCI0.I2C2.CAM0.EP00" },
 		}
 	    })
 	}

Documentation/firmware-guide/acpi/dsd/leds.rst

@@ -15,11 +15,6 @@ Referring to LEDs in Device tree is documented in [video-interfaces], in
 "flash-leds" property documentation. In short, LEDs are directly referred to by
 using phandles.
 
-While Device tree allows referring to any node in the tree [devicetree], in
-ACPI references are limited to device nodes only [acpi]. For this reason using
-the same mechanism on ACPI is not possible. A mechanism to refer to non-device
-ACPI nodes is documented in [data-node-ref].
-
 ACPI allows (as does DT) using integer arguments after the reference. A
 combination of the LED driver device reference and an integer argument,
 referring to the "reg" property of the relevant LED, is used to identify
@@ -74,7 +69,7 @@ omitted. ::
 			Package () {
 				Package () {
 					"flash-leds",
-					Package () { ^LED, "led@0", ^LED, "led@1" },
+					Package () { "^LED.LED0", "^LED.LED1" },
 				}
 			}
 		})

drivers/acpi/resource.c

@@ -534,7 +534,7 @@ static const struct dmi_system_id irq1_level_low_skip_override[] = {
  */
 static const struct dmi_system_id irq1_edge_low_force_override[] = {
 	{
-		/* MECHREV Jiaolong17KS Series GM7XG0M */
+		/* MECHREVO Jiaolong17KS Series GM7XG0M */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "GM7XG0M"),
 		},

drivers/pinctrl/pinctrl-amd.c

@@ -37,6 +37,10 @@
 #include "pinctrl-utils.h"
 #include "pinctrl-amd.h"
 
+#ifdef CONFIG_SUSPEND
+static struct amd_gpio *pinctrl_dev;
+#endif
+
 static int amd_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
 {
 	unsigned long flags;
@@ -890,6 +894,44 @@ static void amd_gpio_irq_init(struct amd_gpio *gpio_dev)
 	}
 }
 
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_ACPI)
+static void amd_gpio_check_pending(void)
+{
+	struct amd_gpio *gpio_dev = pinctrl_dev;
+	struct pinctrl_desc *desc = gpio_dev->pctrl->desc;
+	int i;
+
+	if (!pm_debug_messages_on)
+		return;
+
+	for (i = 0; i < desc->npins; i++) {
+		int pin = desc->pins[i].number;
+		u32 tmp;
+
+		tmp = readl(gpio_dev->base + pin * 4);
+		if (tmp & PIN_IRQ_PENDING)
+			pm_pr_dbg("%s: GPIO %d is active: 0x%x.\n", __func__, pin, tmp);
+	}
+}
+
+static struct acpi_s2idle_dev_ops pinctrl_amd_s2idle_dev_ops = {
+	.check = amd_gpio_check_pending,
+};
+
+static void amd_gpio_register_s2idle_ops(void)
+{
+	acpi_register_lps0_dev(&pinctrl_amd_s2idle_dev_ops);
+}
+
+static void amd_gpio_unregister_s2idle_ops(void)
+{
+	acpi_unregister_lps0_dev(&pinctrl_amd_s2idle_dev_ops);
+}
+#else
+static inline void amd_gpio_register_s2idle_ops(void) {}
+static inline void amd_gpio_unregister_s2idle_ops(void) {}
+#endif
+
 #ifdef CONFIG_PM_SLEEP
 static bool amd_gpio_should_save(struct amd_gpio *gpio_dev, unsigned int pin)
 {
@@ -942,6 +984,9 @@ static int amd_gpio_suspend_hibernate_common(struct device *dev, bool is_suspend
 
 static int amd_gpio_suspend(struct device *dev)
 {
+#ifdef CONFIG_SUSPEND
+	pinctrl_dev = dev_get_drvdata(dev);
+#endif
 	return amd_gpio_suspend_hibernate_common(dev, true);
 }
 
@@ -1115,7 +1160,7 @@ static int amd_gpio_probe(struct platform_device *pdev)
 	if (gpio_dev->irq < 0)
 		return gpio_dev->irq;
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_SUSPEND
 	gpio_dev->saved_regs = devm_kcalloc(&pdev->dev, amd_pinctrl_desc.npins,
 					    sizeof(*gpio_dev->saved_regs),
 					    GFP_KERNEL);
@@ -1181,6 +1226,7 @@ static int amd_gpio_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, gpio_dev);
 	acpi_register_wakeup_handler(gpio_dev->irq, amd_gpio_check_wake, gpio_dev);
+	amd_gpio_register_s2idle_ops();
 
 	dev_dbg(&pdev->dev, "amd gpio driver loaded\n");
 	return ret;
@@ -1199,6 +1245,7 @@ static void amd_gpio_remove(struct platform_device *pdev)
 
 	gpiochip_remove(&gpio_dev->gc);
 	acpi_unregister_wakeup_handler(amd_gpio_check_wake, gpio_dev);
+	amd_gpio_unregister_s2idle_ops();
 }
 
 #ifdef CONFIG_ACPI

include/linux/acpi.h

@@ -1134,13 +1134,13 @@ void acpi_os_set_prepare_extended_sleep(int (*func)(u8 sleep_state,
 
 acpi_status acpi_os_prepare_extended_sleep(u8 sleep_state,
 					   u32 val_a, u32 val_b);
-#if defined(CONFIG_SUSPEND) && defined(CONFIG_X86)
 struct acpi_s2idle_dev_ops {
 	struct list_head list_node;
 	void (*prepare)(void);
 	void (*check)(void);
 	void (*restore)(void);
 };
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_X86)
 int acpi_register_lps0_dev(struct acpi_s2idle_dev_ops *arg);
 void acpi_unregister_lps0_dev(struct acpi_s2idle_dev_ops *arg);
 int acpi_get_lps0_constraint(struct acpi_device *adev);
@@ -1149,6 +1149,13 @@ static inline int acpi_get_lps0_constraint(struct device *dev)
 {
 	return ACPI_STATE_UNKNOWN;
 }
+static inline int acpi_register_lps0_dev(struct acpi_s2idle_dev_ops *arg)
+{
+	return -ENODEV;
+}
+static inline void acpi_unregister_lps0_dev(struct acpi_s2idle_dev_ops *arg)
+{
+}
 #endif /* CONFIG_SUSPEND && CONFIG_X86 */
 void arch_reserve_mem_area(acpi_physical_address addr, size_t size);
 #else