[MSFS] FSLabs A321neo v11.0.1.347 and WingFlex Bridge v3.0.0.1 EFIS/RMP Brightness issue

[jtisserand]

Status

Reported originally by @jtisserand and other user. Confirmed by @skylarkning

Product

EFIS / RMP

Bridge Version

WingFlex Bridge V3.0.0.1

Firmware Version

N/A

Simulator

MSFS 2020 / MSFS 2024

Aircraft/Add-on

FSLabs A321neo V11.0.1.347

Issue

When using the WingFlex EFIS/RMP with the FSLabs A321neo V11.0.1.347 on WingFlex Bridge V3.0.0.1, the EFIS/RMP brightness and the virtual cockpit brightness continuously pulse when Screen Brightness is set below 100%.

Setting Screen Brightness to 100% completely eliminates the issue.

Steps to Reproduce

1. Launch MSFS.
2. Load the FSLabs A321neo V11.0.1.347.
3. Open WingFlex Bridge V3.0.0.1.
4. Connect the WingFlex EFIS/RMP.
5. Set Screen Brightness below 100%.
6. Observe the EFIS/RMP and virtual cockpit brightness behavior.
7. Set Screen Brightness back to 100%.
8. Observe that the pulsing stops.

Expected Result

The EFIS/RMP and virtual cockpit brightness should remain stable at all Screen Brightness levels.

Actual Result

When Screen Brightness is below 100%, the EFIS/RMP and virtual cockpit brightness continuously pulse.

Setting Screen Brightness to 100% stops the pulsing completely.

Workaround

Set Screen Brightness to 100%.

Notes

Reported with FSLabs A321neo V11.0.1.347 and WingFlex Bridge V3.0.0.1.

[skylarkning]

Issue18.MP4

[skylarkning]

We are in touch with FSL regarding this as it is caused by a newly introduced variable in the aircraft system in a recent update. Until we hear back from FSL, this is blocked.