[Bridge Software] Panel settings are not saved after restarting Wings Bridge

[skylarkning]

Status

Reproduced by @skylarkning

Product

All

Bridge Version

V3.0.0.1-Hotfix

Firmware Version

N/A

Simulator

N/A

Aircraft/Add-on

N/A

Issue

The settings can be changed during the current session, but they are lost after Wings Bridge is closed and restarted.

Steps to Reproduce

1. Launch Wings Bridge.
2. Select the A320 Overhead Panel.
3. Assign a function to the Rain Rplnt button.
4. Enable the L/R Wiper Sync option.
5. Close Wings Bridge.
6. Launch Wings Bridge again.
7. Open the A320 Overhead Panel settings.
8. Observe the Rain Rplnt assignment and L/R Wiper Sync option.

Expected Result

The Rain Rplnt button assignment and L/R Wiper Sync setting should be saved and restored when Wings Bridge is restarted.

Actual Result

After restarting Wings Bridge, the Rain Rplnt button assignment is cleared and the L/R Wiper Sync option is no longer enabled.

Workaround

The settings must be configured again each time Wings Bridge is launched.

Notes

This appears to be a regression, as these settings were reportedly saved correctly in an earlier version of Wings Bridge.

[ftd1949]

Still not "seeing" any XP12 aircraft.

[skylarkning]

Still not "seeing" any XP12 aircraft.

@ftd1949 I believe you are referring to Issue #25 instead of this one? Would you be able to attach a screenshot/video showing the phenomenon?

DAP should natively support the following with our Bridge:

Laminar Baron58
Laminar KingAir C90B
Laminar CitationX
Laminar Skyhawk G1000
Laminar Cirrus Sr22
Laminar Vision Sf50
Laminar Lancair Evolution
Laminar Rv10