ZeroKey
This is a 3D-printable case designed for the RP2350-Zero - Waveshare development board, intended to transform it into a robust and portable FIDO2 hardware security key with direct USB-C plug-in capability.
This case requires the pico-fido firmware, which is available from the author's open-source repository at: polhenarejos/pico-fido
🚀 Key Features:
Custom-Fit: Perfectly tailored for the RP2350-Zero - Waveshare board and fully compatible with the pico-fido project.
Full Protection: The full-enclosure design effectively shields the circuit board from daily bumps and damage.
Precise Cutouts: Features precise openings for the USB-C port and function buttons, ensuring easy access and operation.
Ready to Print: The repository includes an optimized .STL file, ready for immediate 3D printing.
Recommended Material: It is recommended to use photocuring resin (v3.1) for printing.
📝 Additional Notes:
For a more permanent and secure assembly, this case comes with its own snap-fit locking mechanism to prevent detachment.
Required Materials:
RP2350-Zero - Waveshare development board
USB-C to USB-C Adapter
Length: 28mm (Critical dimension)
Max Width: 8.4mm
Note: Please verify the exact length before use/assembly.
📜 License
This project is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0). You are free to share and adapt this work, provided you give appropriate credit, use it for non-commercial purposes, and distribute your contributions under the same license.
This project is created by [GN998] and is officially published and maintained ONLY on GitHub.
Official Repository: https://github.com/GN998/ZeroKey
Unauthorized mirrors of this repository may be found on other platforms. Please be sure to visit the official GitHub repository.