Skip to content

docs(status): name the pull requests of every package - #339

Merged
ttbombadil merged 12 commits into
feature/browser-emulationfrom
docs/status-pr-numbers
Oct 24, 2026
Merged

ttbombadil merged 12 commits into
feature/browser-emulationfrom
docs/status-pr-numbers

Conversation

@ttbombadil

Copy link
Copy Markdown
Collaborator

Inhalt

Statusdatei nach Auftrag Abschnitt 8: Jede Zeile nennt ihre PR-Nummer statt „(dieser PR)“. Gestapelt auf #338 → … → #334; Merge zuletzt.

Keine Code- oder Teständerung.

🤖 Generated with Claude Code

ttbombadil and others added 12 commits October 23, 2026 19:57
Port B with INT0 and PCINT0, timer 0 with its own registers and one-word
vectors, the ATtiny timer 1, a four-channel ADC that reads REFS2 at bit 4,
EEPROM timed for 8 MHz, watchdog and clock prescaler. INT0 and the pin-change
interrupt share GIMSK and GIFR, which avr8js wires for one of them only; the
profile wraps both hooks. Registered with the board hardware in P6.4.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TX is decoded from PB0 with the baud rate found from the edge distances and
the bit width measured from them; RX drives PB1 through an analog comparator
model. SoftwareUart offers the USART members SerialPorts uses, for the
ATtiny85 board.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pins 0-5 as PB0-PB5 with A0-A3 as second names, PWM on 0, 1 and 4, RESET on
PB5 and Serial as a software port on 0/1. SerialPorts takes a USART or the
software UART, the PWM observation reads timer 1 of the ATtiny85, and the
sketch parsers resolve A<n> and analogRead(n) as ATTinyCore does. The pin
map is checked against the core in the toolchain gate.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DIP-8 board view, LED and analog labels from the board's own names, the
sketch's Serial.begin() rate for the software UART, five corpus probes, an
end-to-end test and the user guide with the board's limits. The software
UART now judges every fitting baud rate on its frames and decodes TX only
while Serial is active. M3 acceptance report.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On phones the floating panel navigation covered pins of the board (Uno
A0-A5, ATtiny85 PB0-PB2). The mobile board view now leaves room for it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…ny tests

The gateway deployment test listed the pilot's boards by hand and failed once
the ATtiny85 became preview; it now takes them from the catalog. The ATtiny85
board tests stop as soon as their result is there and share one probe run
(16.8 s to 5.6 s under coverage).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
@ttbombadil
ttbombadil merged commit 8186402 into feature/browser-emulation Oct 24, 2026
6 checks passed
@ttbombadil
ttbombadil deleted the docs/status-pr-numbers branch October 24, 2026 08:30
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

1 participant