Search results

Calibration issues

Status: Open.

#150 In OpenCentauri/cosmos;

· Ididnttouchthat opened on Apr 17, 2026

WIPE_NOZZLE macro ends with extruder temp on 140 and bed plate 60 even after action is complete

Status: Open.

#147 In OpenCentauri/cosmos;

· RowanSkie opened on Apr 15, 2026

Home Y before X

Status: Open.

#137 In OpenCentauri/cosmos;

· seidler2547 opened on Apr 13, 2026

SAVE_CONFIG conflicts with machine.cfg when saving z_offset and position_endstop

Status: Open.

#129 In OpenCentauri/cosmos;

· Tealc86 opened on Apr 11, 2026

Can't connect to Moonraker/OctoPrint on OrcaSlicer

Status: Open.

#112 In OpenCentauri/cosmos;

· RowanSkie opened on Apr 8, 2026

Suppress bed_mesh: Unknown profile [default]

Status: Open.

#110 In OpenCentauri/cosmos;

· RowanSkie opened on Apr 8, 2026

Separate macros for PID tuning and Input Shaping

Status: Open.

#102 In OpenCentauri/cosmos;

· RowanSkie opened on Apr 7, 2026

Uploading large gcode always fails

Status: Open.

#101 In OpenCentauri/cosmos;

· djmillsuk opened on Apr 7, 2026

Bed mcu seems to crash when testing resonnances

Status: Open.

#87 In OpenCentauri/cosmos;

· Bad-Hackerman opened on Apr 5, 2026

Inconsistent tach readings between fans, speeds, and relative to spec speed

Status: Open.

#83 In OpenCentauri/cosmos;

· robertsamples opened on Apr 4, 2026

cranking grinding sound during homing

Status: Open.

#81 In OpenCentauri/cosmos;

· bentleyjamesroberts opened on Apr 4, 2026

files wont stop loading

Status: Open.

#80 In OpenCentauri/cosmos;

· bentleyjamesroberts opened on Apr 4, 2026