[BSP][NXP] Add new features of multicore, hyperram, cherryUSB, NETC and etherCAT

bsp/nxp/imx/imxrt/imxrt1180-nxp-evk/cm33/.config

@@ -118,15 +118,18 @@ CONFIG_RT_ALIGN_SIZE=8
 CONFIG_RT_THREAD_PRIORITY_32=y
 # CONFIG_RT_THREAD_PRIORITY_256 is not set
 CONFIG_RT_THREAD_PRIORITY_MAX=32
-CONFIG_RT_TICK_PER_SECOND=100
+CONFIG_RT_TICK_PER_SECOND=1000
 CONFIG_RT_USING_OVERFLOW_CHECK=y
 CONFIG_RT_USING_HOOK=y
 CONFIG_RT_HOOK_USING_FUNC_PTR=y
 # CONFIG_RT_USING_HOOKLIST is not set
 CONFIG_RT_USING_IDLE_HOOK=y
 CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
 CONFIG_IDLE_THREAD_STACK_SIZE=4096
-# CONFIG_RT_USING_TIMER_SOFT is not set
+CONFIG_RT_USING_TIMER_SOFT=y
+CONFIG_RT_TIMER_THREAD_PRIO=4
+CONFIG_RT_TIMER_THREAD_STACK_SIZE=2048
+# CONFIG_RT_USING_TIMER_ALL_SOFT is not set
 # CONFIG_RT_USING_CPU_USAGE_TRACER is not set
 
 #
@@ -190,7 +193,6 @@ CONFIG_ARCH_USING_HW_ATOMIC_16=y
 CONFIG_RT_USING_CPU_FFS=y
 CONFIG_ARCH_ARM=y
 CONFIG_ARCH_ARM_CORTEX_M=y
-CONFIG_ARCH_ARM_CORTEX_FPU=y
 CONFIG_ARCH_ARM_CORTEX_SECURE=y
 CONFIG_ARCH_ARM_CORTEX_M33=y
 
@@ -587,8 +589,6 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
 # tools packages
 #
 # CONFIG_PKG_USING_VECTOR is not set
-# CONFIG_PKG_USING_SORCH is not set
-# CONFIG_PKG_USING_DICT is not set
 # CONFIG_PKG_USING_CMBACKTRACE is not set
 # CONFIG_PKG_USING_MCOREDUMP is not set
 # CONFIG_PKG_USING_EASYFLASH is not set
@@ -735,8 +735,6 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
 # CONFIG_PKG_USING_HEARTBEAT is not set
 # CONFIG_PKG_USING_MICRO_ROS_RTTHREAD_PACKAGE is not set
 # CONFIG_PKG_USING_CHERRYECAT is not set
-# CONFIG_PKG_USING_EVENT_LOOP is not set
-# CONFIG_PKG_USING_THREAD_MANAGER is not set
 # end of system packages
 
 #
@@ -820,21 +818,7 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
 # CONFIG_PKG_USING_NRFX is not set
 # CONFIG_PKG_USING_RASPBERRYPI_PICO_RP2350_SDK is not set
 # CONFIG_PKG_USING_RASPBERRYPI_PICO_SDK is not set
-
-#
-# MM32 HAL & SDK Drivers
-#
-# CONFIG_PKG_USING_MM32F103XX_CMSIS is not set
-# CONFIG_PKG_USING_MM32F3270X_CMSIS is not set
-# CONFIG_PKG_USING_MM32F5260X_CMSIS is not set
-# CONFIG_PKG_USING_MM32L0XX_CMSIS is not set
-# CONFIG_PKG_USING_MM32L3XX_CMSIS is not set
-# CONFIG_PKG_USING_MM32F103XX_HAL_DRIVER is not set
-# CONFIG_PKG_USING_MM32F3270X_HAL_DRIVER is not set
-# CONFIG_PKG_USING_MM32F5260X_HAL_DRIVER is not set
-# CONFIG_PKG_USING_MM32L0XX_HAL_DRIVER is not set
-# CONFIG_PKG_USING_MM32L3XX_HAL_DRIVER is not set
-# end of MM32 HAL & SDK Drivers
+# CONFIG_PKG_USING_MM32 is not set
 
 #
 # WCH HAL & SDK Drivers
@@ -899,7 +883,9 @@ CONFIG_PKG_NXP_IMXRT_DRIVER_VER="latest"
 #
 # NUVOTON Drivers
 #
+# CONFIG_PKG_USING_NUVOTON_CMSIS_DRIVER is not set
 # CONFIG_PKG_USING_NUVOTON_SERIES_DRIVER is not set
+# CONFIG_PKG_USING_NUVOTON_ARM926_LIB is not set
 # end of NUVOTON Drivers
 
 #
@@ -925,12 +911,6 @@ CONFIG_PKG_NXP_IMXRT_DRIVER_VER="latest"
 # CONFIG_PKG_USING_FT32F4_STD_DRIVER is not set
 # CONFIG_PKG_USING_FT32F4_CMSIS_DRIVER is not set
 # end of FT32 HAL & SDK Drivers
-
-#
-# NOVOSNS Drivers
-#
-# CONFIG_PKG_USING_NOVOSNS_SERIES_DRIVER is not set
-# end of NOVOSNS Drivers
 # end of HAL & SDK Drivers
 
 #
@@ -1111,7 +1091,6 @@ CONFIG_PKG_NXP_IMXRT_DRIVER_VER="latest"
 # CONFIG_PKG_USING_ISOTP_C is not set
 # CONFIG_PKG_USING_IKUNLED is not set
 # CONFIG_PKG_USING_INS5T8025 is not set
-# CONFIG_PKG_USING_IRUART is not set
 # CONFIG_PKG_USING_ST7305 is not set
 # CONFIG_PKG_USING_TM1668 is not set
 # CONFIG_PKG_USING_SPI_TOOLS is not set
@@ -1467,7 +1446,6 @@ CONFIG_SOC_MIMXRT1189CVM8C_CM33=y
 # On-chip Peripheral Drivers
 #
 # CONFIG_BSP_USING_DMA is not set
-# CONFIG_BSP_USING_LPADC is not set
 CONFIG_BSP_USING_GPIO=y
 # CONFIG_BSP_USING_RTC is not set
 # CONFIG_BSP_USING_USB is not set
@@ -1476,23 +1454,34 @@ CONFIG_BSP_USING_LPUART=y
 CONFIG_BSP_USING_LPUART1=y
 # CONFIG_BSP_LPUART1_RX_USING_DMA is not set
 # CONFIG_BSP_LPUART1_TX_USING_DMA is not set
+# CONFIG_BSP_USING_LPUART2 is not set
+# CONFIG_BSP_USING_LPUART3 is not set
+# CONFIG_BSP_USING_LPUART4 is not set
+# CONFIG_BSP_USING_LPUART5 is not set
+# CONFIG_BSP_USING_LPUART6 is not set
+# CONFIG_BSP_USING_LPUART7 is not set
+# CONFIG_BSP_USING_LPUART8 is not set
+# CONFIG_BSP_USING_LPUART9 is not set
 # CONFIG_BSP_USING_LPUART10 is not set
+# CONFIG_BSP_USING_LPUART11 is not set
 # CONFIG_BSP_USING_LPUART12 is not set
-# CONFIG_BSP_USING_I2C is not set
 # CONFIG_BSP_USING_CAN is not set
-# CONFIG_BSP_USING_CLOCK_TIMER is not set
 # CONFIG_BSP_USING_FLEXSPI is not set
 # end of On-chip Peripheral Drivers
 
 #
 # Onboard Peripheral Drivers
 #
-# CONFIG_BSP_USING_SDRAM is not set
+# CONFIG_BSP_USE_HYPERRAM is not set
+# CONFIG_BSP_USE_MULTICORE is not set
 # CONFIG_BSP_USING_ETH is not set
 # CONFIG_BSP_USING_FS is not set
 # end of Onboard Peripheral Drivers
 
 #
 # Board extended module Drivers
 #
+# CONFIG_BSP_LINKER_SCRIPT_RAM is not set
+CONFIG_BSP_LINKER_SCRIPT_FLEXSPI_NOR=y
+# CONFIG_BSP_LINKER_SCRIPT_FLEXSPI_NOR_HYPERRAM is not set
 # end of Hardware Drivers Config

bsp/nxp/imx/imxrt/imxrt1180-nxp-evk/cm33/JLinkSettings.ini

@@ -13,7 +13,7 @@ MaxNumAPs = 0
 LowPowerHandlingMode = 0
 OverrideMemMap = 0
 AllowSimulation = 1
-ScriptFile=""
+ScriptFile="evkmimxrt1180_cm33.jlinkscript"
 [FLASH]
 RMWThreshold = 0x400
 Loaders=""

bsp/nxp/imx/imxrt/imxrt1180-nxp-evk/cm33/applications/SConscript

@@ -3,7 +3,11 @@ from building import *
 import os
 
 cwd = GetCurrentDir()
-src = Glob('*.c')
+
+src = Split("""
+main.c
+""")
+
 CPPPATH = [cwd]
 
 # add for startup script
@@ -12,6 +16,17 @@ if rtconfig.PLATFORM in ['gcc']:
 else:
     CPPDEFINES = []
 
+if GetDepend(['BSP_USE_MULTICORE']):
+    src += Split("""
+    multicore_thread.c
+    """)
+
+if GetDepend(['BSP_USING_FS']):
+    src += Split("""
+    mnt.c
+    """)
+
+# Create application group
 group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
 
 Return('group')