GitHub - brians444/tiva-ads1246-lwip: The firmware read one MP3V5004G (that acts like a pitot tube to measure the wind speed) with an ADS1246 and show the result in a web page with LWIP using SSI

Branches Tags

Name		Name	Last commit message	Last commit date
Latest commit History 19 Commits
.launches		.launches
.settings		.settings
arch		arch
enc-driver		enc-driver
html-files		html-files
httpd		httpd
lwip @ a4a41b9		lwip @ a4a41b9
lwip-dont-compile		lwip-dont-compile
uip-1.0		uip-1.0
.ccsproject		.ccsproject
.cproject		.cproject
.gitmodules		.gitmodules
.project		.project
Makefile		Makefile
README		README
Stellaris LM4F120H5QR.ccxml		Stellaris LM4F120H5QR.ccxml
ads1146.c		ads1146.c
ads1146.h		ads1146.h
bootlink.ld		bootlink.ld
clock-arch.h		clock-arch.h
common.h		common.h
link.ld		link.ld
lm4f120h5qr.cmd		lm4f120h5qr.cmd
lwipopts.h		lwipopts.h
main.c		main.c
main.h		main.h
openocd.cfg		openocd.cfg
spi.h		spi.h
startup_ccs.c		startup_ccs.c
startup_gcc.c		startup_gcc.c
toolchainsettings		toolchainsettings
uip-conf.h		uip-conf.h

Repository files navigation

This is currently a rather messy example for the Stellaris ENC28J60 booster packet.

At startup DHCP is used to acquire an IPv4 address. After that a small web-page is served on port 80.

In order to build this code, a working arm-none-eabi-gcc installation is required as well as the StellarisWare
driver library.
Before buidling, please modify "toolchainsettings" accordingly.

About

The firmware read one MP3V5004G (that acts like a pitot tube to measure the wind speed) with an ADS1246 and show the result in a web page with LWIP using SSI

Readme