gh-146073: Add fitness/exit quality mechanism for JIT trace frontend

Include/cpython/pystats.h

@@ -144,6 +144,7 @@ typedef struct _optimization_stats {
     uint64_t unknown_callee;
     uint64_t trace_immediately_deopts;
     uint64_t executors_invalidated;
+    uint64_t fitness_terminated_traces;
     UOpStats opcode[PYSTATS_MAX_UOP_ID + 1];
     uint64_t unsupported_opcode[256];
     uint64_t trace_length_hist[_Py_UOP_HIST_SIZE];

Include/internal/pycore_interp_structs.h

@@ -449,6 +449,10 @@ typedef struct _PyOptimizationConfig {
     uint16_t side_exit_initial_value;
     uint16_t side_exit_initial_backoff;
 
+    // Trace fitness thresholds
+    uint16_t fitness_initial;
+    uint16_t fitness_initial_side;
+
     // Optimization flags
     bool specialization_enabled;
     bool uops_optimize_enabled;

Include/internal/pycore_optimizer.h

@@ -15,6 +15,23 @@ extern "C" {
 #include "pycore_optimizer_types.h"
 #include <stdbool.h>
 
+/* Default fitness configuration values for trace quality control.
+ * FITNESS_INITIAL and FITNESS_INITIAL_SIDE can be overridden via
+ * PYTHON_JIT_FITNESS_INITIAL and PYTHON_JIT_FITNESS_INITIAL_SIDE */
+#define FITNESS_PER_INSTRUCTION     2
+#define FITNESS_BRANCH_BASE         5
+#define FITNESS_INITIAL             (FITNESS_PER_INSTRUCTION * 1000)
+#define FITNESS_INITIAL_SIDE        (FITNESS_INITIAL / 2)
+#define FITNESS_BACKWARD_EDGE       (FITNESS_INITIAL / 10)
+
+/* Exit quality constants for fitness-based trace termination.
+ * Higher values mean better places to stop the trace. */
+
+#define EXIT_QUALITY_DEFAULT         200
+#define EXIT_QUALITY_CLOSE_LOOP      (4 * EXIT_QUALITY_DEFAULT)
+#define EXIT_QUALITY_ENTER_EXECUTOR  (2 * EXIT_QUALITY_DEFAULT + 100)
+#define EXIT_QUALITY_SPECIALIZABLE   (EXIT_QUALITY_DEFAULT / 4)
+
 
 typedef struct _PyJitUopBuffer {
     _PyUOpInstruction *start;
@@ -101,7 +118,8 @@ typedef struct _PyJitTracerPreviousState {
 } _PyJitTracerPreviousState;
 
 typedef struct _PyJitTracerTranslatorState {
-    int jump_backward_seen;
+    int32_t fitness;              // Current trace fitness, starts high, decrements
+    int frame_depth;              // Current inline depth (0 = root frame)
 } _PyJitTracerTranslatorState;
 
 typedef struct _PyJitTracerState {

Python/optimizer.c

@@ -549,8 +549,6 @@ dynamic_exit_uop[MAX_UOP_ID + 1] = {
 };
 
 
-#define CONFIDENCE_RANGE 1000
-#define CONFIDENCE_CUTOFF 333
 
 #ifdef Py_DEBUG
 #define DPRINTF(level, ...) \
@@ -598,6 +596,46 @@ add_to_trace(
     ((uint32_t)((INSTR) - ((_Py_CODEUNIT *)(CODE)->co_code_adaptive)))
 
 
+/* Compute branch fitness penalty based on how likely the traced path is.
+ * The penalty is small when the traced path is common, large when rare.
+ * A branch that historically goes the other way gets a heavy penalty. */
+static inline int
+compute_branch_penalty(uint16_t history, bool branch_taken)
+{
+    int taken_count = _Py_popcount32((uint32_t)history);
+    int on_trace_count = branch_taken ? taken_count : 16 - taken_count;
+    int off_trace = 16 - on_trace_count;
+    /* Linear scaling: off_trace ranges from 0 (fully biased our way)
+     * to 16 (fully biased against us), so the penalty ranges from
+     * FITNESS_BRANCH_BASE to FITNESS_BRANCH_BASE + 32. */
+    return FITNESS_BRANCH_BASE + off_trace * 2;
+}
+
+/* Compute exit quality for the current trace position.
+ * Higher values mean better places to stop the trace. */
+static inline int32_t
+compute_exit_quality(_Py_CODEUNIT *target_instr, int opcode,
+                     const _PyJitTracerState *tracer)
+{
+    if (target_instr == tracer->initial_state.start_instr ||
+        target_instr == tracer->initial_state.close_loop_instr) {
+        return EXIT_QUALITY_CLOSE_LOOP;
+    }
+    if (target_instr->op.code == ENTER_EXECUTOR) {
+        return EXIT_QUALITY_ENTER_EXECUTOR;
+    }
+    if (_PyOpcode_Caches[_PyOpcode_Deopt[opcode]] > 0) {
+        return EXIT_QUALITY_SPECIALIZABLE;
+    }
+    return EXIT_QUALITY_DEFAULT;
+}
+
+static inline int32_t
+compute_frame_penalty(const _PyOptimizationConfig *cfg)
+{
+    return (int32_t)cfg->fitness_initial / 5 + 1;
+}
+
 static int
 is_terminator(const _PyUOpInstruction *uop)
 {
@@ -734,13 +772,11 @@ _PyJit_translate_single_bytecode_to_trace(
         DPRINTF(2, "Unsupported: oparg too large\n");
         unsupported:
         {
-            // Rewind to previous instruction and replace with _EXIT_TRACE.
             _PyUOpInstruction *curr = uop_buffer_last(trace);
             while (curr->opcode != _SET_IP && uop_buffer_length(trace) > 2) {
                 trace->next--;
                 curr = uop_buffer_last(trace);
             }
-            assert(curr->opcode == _SET_IP || uop_buffer_length(trace) == 2);
             if (curr->opcode == _SET_IP) {
                 int32_t old_target = (int32_t)uop_get_target(curr);
                 curr->opcode = _DEOPT;
@@ -763,6 +799,21 @@ _PyJit_translate_single_bytecode_to_trace(
         return 1;
     }
 
+    // Fitness-based trace quality check (before reserving space for this instruction)
+    _PyJitTracerTranslatorState *ts = &tracer->translator_state;
+    int32_t eq = compute_exit_quality(target_instr, opcode, tracer);
+
+    // Check if fitness is depleted — should we stop the trace?
+    if (ts->fitness < eq) {
+        // This is a tracer heuristic rather than normal program control flow,
+        // so leave operand1 clear and let the resulting side exit increase chain_depth.
+        ADD_TO_TRACE(_EXIT_TRACE, 0, 0, target);
+        OPT_STAT_INC(fitness_terminated_traces);
+        DPRINTF(2, "Fitness terminated: fitness=%d < exit_quality=%d\n",
+                ts->fitness, eq);
+        goto done;
+    }
+
     // One for possible _DEOPT, one because _CHECK_VALIDITY itself might _DEOPT
     trace->end -= 2;
 
@@ -816,13 +867,16 @@ _PyJit_translate_single_bytecode_to_trace(
             assert(jump_happened ? (next_instr == computed_jump_instr) : (next_instr == computed_next_instr));
             uint32_t uopcode = BRANCH_TO_GUARD[opcode - POP_JUMP_IF_FALSE][jump_happened];
             ADD_TO_TRACE(uopcode, 0, 0, INSTR_IP(jump_happened ? computed_next_instr : computed_jump_instr, old_code));
+            tracer->translator_state.fitness -= compute_branch_penalty(
+                target_instr[1].cache, jump_happened);
             break;
         }
         case JUMP_BACKWARD_JIT:
             // This is possible as the JIT might have re-activated after it was disabled
         case JUMP_BACKWARD_NO_JIT:
         case JUMP_BACKWARD:
             ADD_TO_TRACE(_CHECK_PERIODIC, 0, 0, target);
+            tracer->translator_state.fitness -= FITNESS_BACKWARD_EDGE;
             _Py_FALLTHROUGH;
         case JUMP_BACKWARD_NO_INTERRUPT:
         {
@@ -945,6 +999,32 @@ _PyJit_translate_single_bytecode_to_trace(
                     assert(next->op.code == STORE_FAST);
                     operand = next->op.arg;
                 }
+                else if (uop == _PUSH_FRAME) {
+                    _PyJitTracerTranslatorState *ts_depth = &tracer->translator_state;
+                    ts_depth->frame_depth++;
+                    if (ts_depth->frame_depth >= MAX_ABSTRACT_FRAME_DEPTH) {
+                        // The optimizer can't handle frames this deep,
+                        // so there's no point continuing the trace.
+                        DPRINTF(2, "Unsupported: frame depth %d >= MAX_ABSTRACT_FRAME_DEPTH\n",
+                                ts_depth->frame_depth);
+                        goto unsupported;
+                    }
+                    int32_t frame_penalty = compute_frame_penalty(&tstate->interp->opt_config);
+                    ts_depth->fitness -= frame_penalty * ts_depth->frame_depth;
+                }
+                else if (uop == _RETURN_VALUE || uop == _RETURN_GENERATOR || uop == _YIELD_VALUE) {
+                    _PyJitTracerTranslatorState *ts_depth = &tracer->translator_state;
+                    int32_t frame_penalty = compute_frame_penalty(&tstate->interp->opt_config);
+                    if (ts_depth->frame_depth <= 0) {
+                        // Underflow: returning from a frame we didn't enter
+                        ts_depth->fitness -= frame_penalty * 2;
+                    }
+                    else {
+                        // Reward returning: small inlined calls should be encouraged
+                        ts_depth->fitness += frame_penalty;
+                    }
+                    ts_depth->frame_depth = ts_depth->frame_depth <= 0 ? 0 : ts_depth->frame_depth - 1;
+                }
                 else if (_PyUop_Flags[uop] & HAS_RECORDS_VALUE_FLAG) {
                     PyObject *recorded_value = tracer->prev_state.recorded_value;
                     tracer->prev_state.recorded_value = NULL;
@@ -986,7 +1066,11 @@ _PyJit_translate_single_bytecode_to_trace(
         ADD_TO_TRACE(_JUMP_TO_TOP, 0, 0, 0);
         goto done;
     }
-    DPRINTF(2, "Trace continuing\n");
+    // Update fitness AFTER translation, BEFORE returning to continue tracing.
+    // This ensures the next iteration's fitness check reflects the cost of
+    // all instructions translated so far.
+    tracer->translator_state.fitness -= FITNESS_PER_INSTRUCTION;
+    DPRINTF(2, "Trace continuing (fitness=%d)\n", tracer->translator_state.fitness);
     return 1;
 done:
     DPRINTF(2, "Trace done\n");
@@ -1069,6 +1153,15 @@ _PyJit_TryInitializeTracing(
     assert(curr_instr->op.code == JUMP_BACKWARD_JIT || curr_instr->op.code == RESUME_CHECK_JIT || (exit != NULL));
     tracer->initial_state.jump_backward_instr = curr_instr;
 
+    // Initialize fitness tracking state
+    const _PyOptimizationConfig *cfg = &tstate->interp->opt_config;
+    _PyJitTracerTranslatorState *ts = &tracer->translator_state;
+    bool is_side_trace = (exit != NULL);
+    ts->fitness = is_side_trace
+        ? (int32_t)cfg->fitness_initial_side
+        : (int32_t)cfg->fitness_initial;
+    ts->frame_depth = 0;
+
     tracer->is_tracing = true;
     return 1;
 }

Python/pystate.c

@@ -635,6 +635,22 @@ init_interpreter(PyInterpreterState *interp,
                 "PYTHON_JIT_SIDE_EXIT_INITIAL_BACKOFF",
                 SIDE_EXIT_INITIAL_BACKOFF, 0, MAX_BACKOFF);
 
+    // Trace fitness configuration
+    init_policy(&interp->opt_config.fitness_initial,
+                "PYTHON_JIT_FITNESS_INITIAL",
+                FITNESS_INITIAL, 100, 10000);
+    init_policy(&interp->opt_config.fitness_initial_side,
+                "PYTHON_JIT_FITNESS_INITIAL_SIDE",
+                FITNESS_INITIAL_SIDE, 50, 5000);
+    /* The tracer starts at start_instr, so initial fitness must not be below
+     * the close-loop exit quality or tracing will terminate immediately. */
+    if (interp->opt_config.fitness_initial < EXIT_QUALITY_CLOSE_LOOP) {
+        interp->opt_config.fitness_initial = EXIT_QUALITY_CLOSE_LOOP;
+    }
+    if (interp->opt_config.fitness_initial_side < EXIT_QUALITY_CLOSE_LOOP) {
+        interp->opt_config.fitness_initial_side = EXIT_QUALITY_CLOSE_LOOP;
+    }
+
     interp->opt_config.specialization_enabled = !is_env_enabled("PYTHON_SPECIALIZATION_OFF");
     interp->opt_config.uops_optimize_enabled = !is_env_disabled("PYTHON_UOPS_OPTIMIZE");
     if (interp != &runtime->_main_interpreter) {

Python/pystats.c

@@ -274,6 +274,7 @@ print_optimization_stats(FILE *out, OptimizationStats *stats)
     fprintf(out, "Optimization low confidence: %" PRIu64 "\n", stats->low_confidence);
     fprintf(out, "Optimization unknown callee: %" PRIu64 "\n", stats->unknown_callee);
     fprintf(out, "Executors invalidated: %" PRIu64 "\n", stats->executors_invalidated);
+    fprintf(out, "Optimization fitness terminated: %" PRIu64 "\n", stats->fitness_terminated_traces);
 
     print_histogram(out, "Trace length", stats->trace_length_hist);
     print_histogram(out, "Trace run length", stats->trace_run_length_hist);