Merge remote-tracking branch 'asoc/for-5.18' into asoc-next

Author: broonie

Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml

@@ -21,6 +21,7 @@ properties:
       - const: nvidia,tegra210-aconnect
       - items:
           - enum:
+              - nvidia,tegra234-aconnect
               - nvidia,tegra186-aconnect
               - nvidia,tegra194-aconnect
           - const: nvidia,tegra210-aconnect

Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml

@@ -23,7 +23,9 @@ properties:
           - nvidia,tegra210-adma
           - nvidia,tegra186-adma
       - items:
-          - const: nvidia,tegra194-adma
+          - enum:
+              - nvidia,tegra234-adma
+              - nvidia,tegra194-adma
           - const: nvidia,tegra186-adma
 
   reg:

Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml

@@ -58,6 +58,7 @@ properties:
               - enum:
                   - nvidia,tegra186-agic
                   - nvidia,tegra194-agic
+                  - nvidia,tegra234-agic
               - const: nvidia,tegra210-agic
 
   interrupt-controller: true

Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml

@@ -31,6 +31,10 @@ properties:
           - const: allwinner,sun50i-a64-i2s
           - const: allwinner,sun8i-h3-i2s
       - const: allwinner,sun50i-h6-i2s
+      - const: allwinner,sun50i-r329-i2s
+      - items:
+          - const: allwinner,sun20i-d1-i2s
+          - const: allwinner,sun50i-r329-i2s
 
   reg:
     maxItems: 1
@@ -67,6 +71,7 @@ allOf:
               - allwinner,sun8i-h3-i2s
               - allwinner,sun50i-a64-codec-i2s
               - allwinner,sun50i-h6-i2s
+              - allwinner,sun50i-r329-i2s
 
     then:
       required:

Documentation/devicetree/bindings/sound/arndale.txt

@@ -71,4 +71,24 @@ patternProperties:
         description: CPU to Codec rate channels.
         $ref: /schemas/types.yaml#/definitions/uint32
 
+      dai-tdm-slot-width-map:
+        description: Mapping of sample widths to slot widths. For hardware
+          that cannot support a fixed slot width or a slot width always
+          equal to sample width. A matrix of one or more 3-tuples.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            -
+              description: Sample width in bits
+              minimum: 8
+              maximum: 64
+            -
+              description: Slot width in bits
+              minimum: 8
+              maximum: 256
+            -
+              description: Slot count
+              minimum: 1
+              maximum: 64
+
 additionalProperties: true

Documentation/devicetree/bindings/sound/audio-graph-port.yaml

@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/awinic,aw8738.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic AW8738 Audio Amplifier
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description:
+  The Awinic AW8738 is a simple audio amplifier with different operation modes
+  (set using one-wire pulse control). The mode configures the speaker-guard
+  function (primarily the power limit for the amplifier).
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  compatible:
+    const: awinic,aw8738
+
+  mode-gpios:
+    description:
+      GPIO used for one-wire pulse control. The pin is typically called SHDN
+      (active-low), but this is misleading since it is actually more than
+      just a simple shutdown/enable control.
+    maxItems: 1
+
+  awinic,mode:
+    description: Operation mode (number of pulses for one-wire pulse control)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 7
+
+  sound-name-prefix: true
+
+required:
+  - compatible
+  - mode-gpios
+  - awinic,mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    audio-amplifier {
+        compatible = "awinic,aw8738";
+        mode-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>;
+        awinic,mode = <5>;
+        sound-name-prefix = "Speaker Amp";
+    };